News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Carbs

Started by Cash Dereszynski, July 23, 2015, 05:43:40 PM

Previous topic - Next topic

FJmonkey

Randy at RPM has an FI system for the FJ, he needs access to a dyno to complete the mapping. The FI is so much more efficient with fuel it pulls like a 1350. No more cold starts or messing with the choke. Going up in the hills 10,000 feet and it still pulls hard for passing them slow tourists. How much does a good dyno cost? Maybe enough of us could pitch in do a group buy and get the FI finished for the FJ.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

JPaganel

Quote from: FJmonkey on November 08, 2015, 09:30:00 AM
Randy at RPM has an FI system for the FJ,
Randy has a prototype. Once he gets the mapping down, he will need to get it into production. This will take time. Much as I hate to say it, but carbs are available now and are cheaper than that system will be once it hits production.

Quote from: FJmonkey on November 08, 2015, 09:30:00 AMThe FI is so much more efficient with fuel it pulls like a 1350. No more cold starts or messing with the choke. Going up in the hills 10,000 feet and it still pulls hard for passing them slow tourists.
Oh, don't rub it in... I'd LOOOOVE a FI FJ.


Quote from: FJmonkey on November 08, 2015, 09:30:00 AM
How much does a good dyno cost? Maybe enough of us could pitch in do a group buy and get the FI finished for the FJ.
Dyno tuning shops advertise renting time on theirs at about $130 an hour. I'm guessing buying a dyno is probably in the vicinity of 15K.
1993 FJ1200 ABS

1984 FJ600, up on blocks

1986 FJ1200, flaming wreck, repaired and sold
1986 FJ1200, repaired, ridden, sold


I don't want a pickle
I just want to ride my motorcicle

Cash Dereszynski

Quote from: Pat Conlon on November 07, 2015, 07:05:31 PM
If it's off Hwy 74 then that would not be in Palm Springs, but in Palm Desert, so welcome neighbor.
If you've never ridden a bike on Hwy 74 you're in for a treat. The road has a fresh overlay, smooth as silk.

Looking forward to Hyw74 have done Hyw 2 since 1976 . And yes I know it's Palm Desert not Palm Springs ...Potatoes , Patatoes....Fuck it lets ride.

Cash
Fuck it,let's ride.

Cash Dereszynski

Are 1984 and 1985 both vacuum feed not Electric fuel pump?

Cash
Fuck it,let's ride.

rktmanfj

Quote from: Cash Dereszynski on November 16, 2015, 06:12:13 PM
Are 1984 and 1985 both vacuum feed not Electric fuel pump?

Cash

Gravity, no pump.

Randy T
Indy

Blessed be the LORD my strength, which teacheth my hands to war, and my fingers to fight.
Psalms 144:1

'89 FJ1200
'90 FJ1200
'78 XT500
'88 XT350


Cash Dereszynski

Bought Ebay carbs, RPM has them . I'll have them back soon.

Cash
Fuck it,let's ride.

Cash Dereszynski

Got carbs back from RPM , installed them .....Now I have a motorcycle!!!!!!!. Thanks to RPM Randi and Robert . Not cheap $160 for carbs $425 for rebuild. All good now, calm in traffic, ready to go on the Crest or Hwy 74 . Next to do, Paint and electrical hook up of tach speedo modual, no intructions !! But I'm riding the Beast so thats cool. Thanks for the
encouragement and info along the way .

Cash
Fuck it,let's ride.

racerrad8

Quote from: Cash Dereszynski on December 08, 2015, 01:19:09 PM
Got carbs back from RPM , installed them .....Now I have a motorcycle!!!!!!!.

Thanks to RPM Randy and Robert . Not cheap $160 for carbs $425 for rebuild.
Cash

Cash,

Yes you did spend a little over $400.00 with us in total, but the actual carb rebuild was only $325.00.

What bumped it up over the $400.00 mark was the air filters, shipping & sales tax.

Glad to know it is now running properly, I know it has been a long hard road to this point with a lot of work on your part.

Thanks again and enjoy the ride.

Don't forget to add the Seafoam if you are going to let the bike sit for more than a couple of weeks.

Randy - RPM
Randy - RPM

FJmonkey

I guess if weather permits we can run the Crest this weekend (Sat is better for me). We cannot run the full Crest, seasonal closure so we can go as far as the tunnel then have to head back. So the actual run up is about 35 miles and then back. And a stop at Newcomb's Ranch for food, drink and see what other bikes are there.

Any SoCal riders interested? We can make it a longer ride by shooting north from the Crest. Angels Forest HWY is a fast sweeper ride. This gets us near Elizabeth Lake road, not exciting but it leads to Bouquet CYN or San Francisquito CYN.  Bouquet CYN has a motorcycle stop called Big Oaks, food, drinks, and restroom if needed. From San Francisquito CYN we can also take Spunky CYN back to Bouquet CYN, the first part is boring residential. The second half is tight, technical and opens up to great view of the reservoir.  Or we could take Big Tujunga over to Little Tujunga and run North up Sand CYN (also tight and technical) then up Bouquet CYN.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

simi_ed

Love to, but I have a conflict.
-- RKBA Regards,

Ed
===
Ed Thiele 
Simi Valley, CA -- I no longer have SoCal manners.
'89 FJ12C (Theft deterrent Silver/White)


- All that is necessary for the forces of evil to win in the world is for
enough good men to do nothing.

- Edmund Burke

Cash Dereszynski

Quote from: racerrad8 on December 08, 2015, 01:55:38 PM
Quote from: Cash Dereszynski on December 08, 2015, 01:19:09 PM
Got carbs back from RPM , installed them .....Now I have a motorcycle!!!!!!!.

Thanks to RPM Randy and Robert . Not cheap $160 for carbs $425 for rebuild.
Cash


Don't forget to add the Seafoam if you are going to let the bike sit for more than a couple of weeks.

Randy - RPM
I will ride it daily, no worries about lack of use.

Cash
Fuck it,let's ride.

copper

Cash running good now?

Cash Dereszynski

Yes, all good, small tweaks electrical stuff. Runs great sorting out stuff, checking bolts, reacquainting with the bike's handling and a new favorite Hyw 74.
RPM did a great job.


Cash
Fuck it,let's ride.

racerrad8

Thanks Cash, good to hear everything is good to go.

Randy - RPM
Randy - RPM