i think is M6
but what is the length?
and head type
i could use cap screw right?
and is there a washer in there?
I dont know the length, diameter or thread pitch, but the bolt, washer and nut are available new from Yamaha. #11, #12, and #13 in the diagram
https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/electrical-2 (https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/electrical-2)
Fred
Quote from: aviationfred on June 08, 2020, 08:55:51 PM
I dont know the length, diameter or thread pitch, but the bolt, washer and nut are available new from Yamaha. #11, #12, and #13 in the diagram
https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/electrical-2 (https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/electrical-2)
Fred
thanks but looking for the bolts that hold the pickup plate, not the rotor
MTC,
Decode Yamaha bolt numbers here:
https://www.yamahastarbolt.com/technical-library/decode-yamaha-part-numbers/ (https://www.yamahastarbolt.com/technical-library/decode-yamaha-part-numbers/)
Once you have the correct Yamaha Part Number for a bolt, scroll down and find the Part Number grouping that matches your number, on the linked web site. Digit locations indicate the specs of the bolt.
.
My apologies, I misread your post and listed the bolt that is for the main coils.
I believe what you are looking for are the 2 small bolts in this diagram. #5 in the drawing. They are available from Yamaha and probably RPM.
https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor (https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor)
Fred
If i remeber right you can use the same bolts used on the top camchain guard.
From the part number: 98517-06012-00
It's an M6 x 12mm long. The stock screw has a captive washer.
Should be able to get one at any hardware store
Quote from: FJ_Hooligan on June 09, 2020, 10:29:43 AM
From the part number: 98517-06012-00
It's an M6 x 12mm long. The stock screw has a captive washer.
Should be able to get one at any hardware store
thank you everyone, i am sure it is M6 since that is what the dyna instruction says, but it's 20mm long, i guess i can use a cap screw head, i just needed the length,
when i click on the screw i see no washer
https://www.partzilla.com/product/yamaha/98517-06012-00?ref=c781fe29972bf8524f07297f5deed185810b3760 (https://www.partzilla.com/product/yamaha/98517-06012-00?ref=c781fe29972bf8524f07297f5deed185810b3760)
Quote from: red on June 08, 2020, 09:10:04 PM
MTC,
Decode Yamaha bolt numbers here:
https://www.yamahastarbolt.com/technical-library/decode-yamaha-part-numbers/ (https://www.yamahastarbolt.com/technical-library/decode-yamaha-part-numbers/)
Once you have the correct Yamaha Part Number for a bolt, scroll down and find the Part Number grouping that matches your number, on the linked web site. Digit locations indicate the specs of the bolt.
.
thank you very much
If you use the link Fred provided, the screw is listed as: SCREW, WITH WASHER
Quote from: FJ_Hooligan on June 10, 2020, 02:35:55 PM
If you use the link Fred provided, the screw is listed as: SCREW, WITH WASHER
thanks, i just went and bought hex cap screws but it is still no washers
but i keep looking for sizing, where did you actually see the m6/12mm sizing?
https://www.ebay.com/itm/Yamaha-OEM-Pan-Head-Screw-98517-06012-00-/152464088061 (https://www.ebay.com/itm/Yamaha-OEM-Pan-Head-Screw-98517-06012-00-/152464088061)
https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor (https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor)
Read the #5 part number ^^^ 9857-06012-00
See the middle numbers? Diameter comes first, then the length.
Quote from: Pat Conlon on June 11, 2020, 05:36:44 PM
https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor (https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor)
Read the #5 part number ^^^ 9857-06012-00
See the middle numbers? Diameter comes first, then the length.
sorry need to be spoon fed everything, thanks
Quote from: mtc on June 12, 2020, 12:47:33 AM
Quote from: Pat Conlon on June 11, 2020, 05:36:44 PM
https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor (https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor)
Read the #5 part number ^^^ 9857-06012-00
See the middle numbers? Diameter comes first, then the length.
sorry need to be spoon fed everything, thanks
Are you still in the high chair at home :biggrin:
.
Keep yer heads low, squad; snipers are in the area!
We'll get everybody through, just hang tough.
.
Quote from: Sparky84 on June 12, 2020, 03:21:27 AM
Quote from: mtc on June 12, 2020, 12:47:33 AM
Quote from: Pat Conlon on June 11, 2020, 05:36:44 PM
https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor (https://www.partzilla.com/catalog/yamaha/motorcycle/1985/fj1100n/pickup-coil-governor)
Read the #5 part number ^^^ 9857-06012-00
See the middle numbers? Diameter comes first, then the length.
sorry need to be spoon fed everything, thanks
Are you still in the high chair at home :biggrin:
sometimes