Fork seals

[Flying Scotsman]

I bought some seals for my forks and they dont fit.
They are all balls and seals are all in sealed bags.Bags have a part # on them I will get #'s in the am.
What is the correct all balls # for the fork oil and dust seal's.

Its a 86 with 90 forks.

[FJmonkey]

Same seals fit all years of FJs.

[Flying Scotsman]

No one has all balls part #s for them.

[Arnie]

The correct # for fork seals is the OEM Yamaha fork seals  3LC-23145-00-00

I believe that Randy (RPM) sells a kit with seals, bushes, and dust covers.

Arnie

[Flying Scotsman]

Arnie i want the all balls part #s so I can tell the seller the right # not the # he sent.
dont want to just say there wrong but want to give him the right #s.
Yamaha # dont help me none.

[Flying Scotsman]

#22-56125 is on main package
35-1022 is on oil seals
36-1012 is on dust seals

When I look them up I get 39mm I.D.

[Derek Young]

The correct # for fork seals is the OEM Yamaha fork seals  3LC-23145-00-00

I believe that Randy (RPM) sells a kit with seals, bushes, and dust covers.

Arnie

Arnie is right. OEM Yamaha IS the right part #.  Do yourself a favor and send that other junk back.  Just sayin...

Derek

[Flying Scotsman]

I already knew the yamaha part #  
And typically I would buy OEM however I dont think Yamaha has a better oil seal than All Balls so I chose to get them instead.
All I was asking for was ALL Balls part #s so i could tell the seller he f##### up and give him the right #s.
Telling me that the right # is Yamahas # is just a waste of time.

My point here is that the i.d. is 39 mm it aint going to fit.
Anyone else wants to ride my ass for buying All Balls instead of Yamaha go right ahead.

[Goetz]

i just put all balls seals in 6 months ago and they are already leaking. I bought oem this time. If i can find the package ill get u the #s tho

[rktmanfj]

Since you insist on buying inferior parts, the seals should be 41mm.

All Balls #55-117-586.

Save that Yamaha number for when you need it in a few weeks...   

[Flying Scotsman]

I have used them twice and have no problems.
I have contacted the seller to return them.
One fork was leaking on the 86.I had some old seals that i had replaced with all balls a couple of years back so I took an old used one and installed it and reassembled my forks.I took it for a short test ride last night about 11.00 pm and forks felt great.Dont know if there still leaking I need to go see.I will get more seals and do both forks again.Seal that came out did not look like any I had seen before it had no inner spring and was real soft.

[Flying Scotsman]

What proof do you have that its an inferior part.
I dont believe you.

[Flying Scotsman]

Since you insist on buying inferior parts, the seals should be 41mm.

All Balls #55-117-586.

Save that Yamaha number for when you need it in a few weeks...   

Thanks for the part # though.

[racerrad8]

Was the "all balls" significantly cheaper than the set that I sell?

The set I sell are the NOK brand seal which is what Yamaha supplies.

Randy - RPM

[Flying Scotsman]

I did not check.
My  reason was that I am in transition again and looking for a new place to live.
So my bank info credit card info address etc needs updated.Did not feel like taking time to do it till I move.
I had this problem once at rpm which I updated and fixed.
Nothing personal.