Post pics of FJs with gsxr and fzr wheels

[VaughanCustoms]

So looking at the wheels by themselves I dont really like the look of the wheel but it may look different actually on a bike. I have tryed searching on here and on google but I am just having trouble finding to many pictures. This will also give some people the chance to show off there sweet bikes as well 
Thanks guys.

[fj11.5]

The fzr and gsxr wheels look exactly like the curved spoke fj ones, if you buy the 87-92 years

[fintip]

Fjmods should have what you're looking for. I think it's fjmods.co.uk.

[VaughanCustoms]

True but I actually like the split spoke look of the FJ wheel rather than just like a tri-blade style wheel

[aviationfred]

Here are photos of the GSXR rear mod and the FZR front mod that I have, The rear wheel is from a 92' GSXR750 and the front is from a 88' FZR750R. Hope this helps.

Fred

[markmartin]

[fj11.5]

Aww hell mate, that's a shocking veiw up in the mountains  , where is that,

[Firehawk068]

The front wheel is an '88 FZR1000 Genesis wheel, the rear is a '92 FZR1000 Exup wheel.

[markmartin]

Aww hell mate, that's a shocking veiw up in the mountains  , where is that,

http://goo.gl/maps/AOQid

Cadillac Mountain, Acadia National Park, Maine, USA

[fj11.5]

Very very nice, almost thought it was scotland or here to start with

[Dan Filetti]

[Cadillac Mountain, Acadia National Park, Maine, USA

Been there too!  Not on a bike though.

Dan

[X-Ray]

The front wheel is an '88 FZR1000 Genesis wheel, the rear is a '92 FZR1000 Exup wheel.

Are those stunning wheels of yours powdercoated or painted Alan?

Regards
Ray

[Firehawk068]

The front wheel is an '88 FZR1000 Genesis wheel, the rear is a '92 FZR1000 Exup wheel.

Are those stunning wheels of yours powdercoated or painted Alan?

Regards
Ray

I had them powdercoated, and then I polished the lips.................That was a pain in the ass! But they turned out nice, and it was worth it in the end.

[flips]

Hi Guys.

I have the 88 fzr1000 17" 3.5 front & 18" 4.5 on the rear.....





Polishing is hard,dirty,tedious & time consuming work!

Cheers 

Jeff P

[fj1289]

If you want to go to 17 inch rims but still keep a split spoke style, keep a lookout for some old Performance Machine (PM) Chicaine rims.  Hard (but not impossible) to find - especially FJ specific.  Other models can be made to work - the bearing carriers/rotor/sprocket carriers bolt to the center section.  Would not be a difficult task to modify or even remake them -- I had to bore the ID to fit a larger gearing on mine since I adapted them to the R1 front end.  They are usually polished - I had to black them out of course!