News:

           Enjoy your FJ


Main Menu

Clutch Master Cylinder Rebuild

Started by Jack, May 27, 2013, 06:28:13 PM

Previous topic - Next topic

Jack

I'm rebuilding my '92 FJ 1200 clutch master cylinder for the first time.  My question is about the rubber dust boot that's inside the cylinder above the piston.  I know I'm supposed to remove a circlip, but the rubber boot is in the way. Does the boot just pull out?  I have a replacement, so I could just yank out.   Advice on this would be helpful.  Thanks.

Jack

FJmonkey

The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side