Paging The Fan (Bill P)

[racerrad8]

The Fan (Bill P) I need to get a hold of you. I have been trying to get in touch for quite some time and have  left countless voice mails, emails and PM's here.

Can you please send me an email or give me a call.

randy@rpmracingca.com

Randy - RPM

[racerrad8]

If anybody that has Bill's contact info would be so kind to call him and ask him to get contact me, I would appreciate it.

I see he was even logged on here today; October 10, 2011, 05:39:26 PM but I cannot get him to respond to me.

He can call me at (209)844-9831 or email; randy@rpmracingca.com

Thanks in advance for any assistance.

Randy - RPM

[racerrad8]

His last log onto the forum; October 13, 2011, 11:20:45 AM

Still no contact...

Randy - RPM

[FJmonkey]

His last log onto the forum; October 10, 2011, 05:39:26 PM and October 13, 2011, 11:20:45 AM
Still no contact...
Randy - RPM

Randy, you must feel like the Redheaded, Bucktoothed, stepchild that nobody loves. Maybe someone else is using his log in??? I feel for you man....

[racerrad8]

Naw, I just can't figure out why he will not return my calls, emails or PM's. As a matter of fact he is on line right now...maybe I will hear something...

Last Active:  Today at 05:45:00 PM

And no he does not owe me money.

Randy - RPM

[Marsh White]

It must remind you of trying to get ahold of me these last several months!   

[simi_ed]

It's your deodorant ...



Sorry, no phone # for Bill.

[Harvy]

Randy...PM coming your way.....
Harvy

[racerrad8]

It must remind you of trying to get ahold of me these last several months!   

Hmmm, not quite as bad, at least I hear from you after I call a few times...

It's your deodorant ...

I have to check that out...

Randy...PM coming your way.....
Harvy

Thanks Harvy

Randy - RPM

[Pat Conlon]

Randy, I hope you don't mind....I set this post as a sticky so it will always be at the top of the page.

Let me know when you and Bill connect (it's just a matter of time) and I will remove the sticky.

Pat

[racerrad8]

Well, I just got back to the shop after my four work days and still not word from Bill.

He was last active; Yesterday at 01:29:18 AM

Randy - RPM

[FJmonkey]

Well, I just got back to the shop after my four work days and still not word from Bill.
He was last active; Yesterday at 01:29:18 AM
Randy - RPM

Any club members close to Bill? We could posse up and make an FJ ride by......

[racerrad8]

Well, through several members I was able to acquire a different phone number for Bill. I called today and left a message with the person who answered.

She said he gets in "real late". I explained to her I was in California, so he can call anytime since I am a couple of hours behind and I will still be up & around.

Randy - RPM

[mst3kguy]

i emailed him a few days ago to make sure he was alive.  he replied he's been working non-stop.  i let him know you were trying to reach him.

[racerrad8]

i emailed him a few days ago to make sure he was alive.  he replied he's been working non-stop.  i let him know you were trying to reach him.

I am pretty certain he is still alive, he logged on again this morning; Today at 01:11:49 AM and I presume I spoke to his wife yesterday and she told me he was working. I glad to see he took the time to email you at your first request, I haven't heard a work from him in five months.

Now the back story to the reason I am trying to reach Bill...

Back in January 2011 I started working with a company to make a shim pack fork valve for the FJ. I was told by several members that Bill was the fork guru and would be the best person to do testing for the FJ forks as he does fork work for a living.

I contacted Bill and he said he needed to rebuild Dean's forks and would install them in there and start the testing once the weather was good enough to ride in.

He then contacted me asking if I had a stock set of fork tubes because he needed some parts, which I sent to him.

Fast forward to June and I still have not heard anything from Bill when a member inquires about the testing and Bill posts to the Forum that he has installed them in Dean's forks, but won't be able to install them on the bike until next week.

Actually I am using Dean Narramores bike. I installed them last night and have a second set of forks equipped with emulators to compare them with. Unfortunately I am leaving for Barber tomorrow and won't be able to put the forks on the bike or test ride until next week.

Fast forward again to July when I start sending him PM messages on the forum and emails inquiring about the testing and an update, no word.

That brings us up to today, I have left countless voice messages on his cell phone, PM's from this forum, emails directly to him and he will not contact me.

At this point I really just want to get the valves and the tools to work on them back so that I can send them to someone that can do some independent testing for me. The riding season for 2011 here in the U.S. is quickly ending and I would have liked to have this product refined and available to the FJ owner so they had an option when doing their winter work.

Thanks Dean for emailing him, can you tell me if the valves ever got installed on your bike? If they did not is there a possibility you or someone in the area can go by and pick them up and send them back to me?

He can keep the other fork parts I sent to him, I really need to move forward on this new product, as I had to invest capital to start design & production. This is the same company that I am working with on a rear shock package as well, which they have been relucant to do since the fork valves have not come to completion yet.

Any help a fellow forum member can assist me in this issue I would greatly appreciate it.

Randy - RPM