Irishluck bashing

[Harvy]

How much longer do we have to put up with this shit?

I have received MANY PMs and requests to permanently Ban Irishluck.  Curiously - I also received a PM from Irishluck himself asking me NOT to ban him - that he just needs to fix his FJ up and then he will leave.

I think you all know my opinion on the subject.  I think I will put up a Poll here and see what the consensus is.  So, go Rock the Vote!  

My vote is NO.
I've been well entertained.
I also remember when I thought I knew it all.
And I have a vague recollection of not being able to spell or use punctuation.

Lets keep Mr Irishluck.......... after all, when I'm dead and buried, he is still going to be riding an FJ (hopefully).


Harvy

[Klavdy]

what cause i didnt post a clear enough picture up when i was using a camera phone with no flash cause my camera broke? or the fact that i happen to misspell a couple of words?



and there is also a pressure clave and a special cleaner, not sure what its called but you can stick carbs or anything else in it and it basically spins it and cleans it.

that was the "something"

That's the way mate, NOW you're getting it.
See how much easier it is to read your post?
I don't want to see you get banned, I want to see you learn how to fix your bike, hang around and maybe meet some of the blokes here.
I come all the way over from Australia to ride with some of the jerks on this list mate, that's how cool they are.
Listen to what they have to say, you'll get a lot of help.

[Pat Conlon]

pat: yes i did agree to your terms and i plan on following them

Ok cool, now just sit back and be quiet..... Don't fuel the fire. Don't rebut anything. Let this thread develop on it's own.

[Harvy]

Who is George B of the forum?


Randy:

Im not trying to argue with anyone, but as it seems ive already made a rep for myself. Since im back the second time around all im trying to do is get my bikes up and running for rideing and racing purposes.

All i did this time was ask about a bracket on the 91 frame and then everything goes bad.

pat:

yes i did agree to your terms and i plan on following them

There is no need for you to know who George is. Others here may disagree.

Most folks here have a name (and use it). Irishluck is not yours (to my knowledge), so give us the pleasure of yours - you never know, a bit more harmony may follow.


Harvy

[irishluck]

what cause i didnt post a clear enough picture up when i was using a camera phone with no flash cause my camera broke? or the fact that i happen to misspell a couple of words?



and there is also a pressure clave and a special cleaner, not sure what its called but you can stick carbs or anything else in it and it basically spins it and cleans it.

that was the "something"

That's the way mate, NOW you're getting it.
See how much easier it is to read your post?
I don't want to see you get banned, I want to see you learn how to fix your bike, hang around and maybe meet some of the blokes here.
I come all the way over from Australia to ride with some of the jerks on this list mate, that's how cool they are.
Listen to what they have to say, you'll get a lot of help.

yea i see that now

ill start to listen more than i speak, hows that sound?

pat: yes i did agree to your terms and i plan on following them

Ok cool, now just sit back and be quiet..... Don't fuel the fire. Don't rebut anything. Let this thread develop on it's own.

alright

Who is George B of the forum?


Randy:

Im not trying to argue with anyone, but as it seems ive already made a rep for myself. Since im back the second time around all im trying to do is get my bikes up and running for rideing and racing purposes.

All i did this time was ask about a bracket on the 91 frame and then everything goes bad.

pat:

yes i did agree to your terms and i plan on following them

There is no need for you to know who George is. Others here may disagree.

Most folks here have a name (and use it). Irishluck is not yours (to my knowledge), so give us the pleasure of yours - you never know, a bit more harmony may follow.


Harvy

im nick

[Klavdy]

there is no shit going on, all im trying to do is get some advice on my 91 frame and ya'll keep bashing me, you dont like it then dont read the post, that simple, deal?

Yea, come on guys, lighten the fuck up. Sure, the kid's got some issues but there's no need to dog pile on him.

He agreed to my conditions so I'm gonna help him.  Remember....He's got a FJ, so he can't be all bad...Let's help him out.

Marsh remember Giovanni? He was violently threatening....Irishdude seems (to me) pretty mellow for all the shit we have given him.

He's just a kid for Christ's sake.....

Giovanni?
Wasn't  he the fellow I befriended and sent schematics for a voltage regulator to?

I hope, really ,really, hope that he built it the way I told him to.

[Pat Conlon]

Giovanni?
Wasn't  he the fellow I befriended and sent schematics for a voltage regulator to?
I hope, really ,really, hope that he built it the way I told him to.

Yea, That was a CLASSIC, didn't he end up burning his house down    FJ garage fires: Amazing how much gas the FJ holds..

Once again reminds me to NEVER NEVER NEVER piss Klavdy off....(take note Irishdude) ssssshh.

[irishluck]

what uh exactly happened....

[tqmx1]

Your snide comments get real old real fast. We try to tell you something you are coming back with a snappy reply almost instantly.

I would be happy to let you stay BIG BUTT things have got to change. Spend some $$ and get a Factory maintains manual (it is your bible for the FJ) most of your questions would be answered and then what does not make any seance ask.

If you can put up with that I say let him stay, If not OFF WITH HIS HEAD.

Irish the dissension is yours.

MY vote keep him for the time being

Kim

[irishluck]

i do have a manual already though... reason why i was asking about the brackets is cause there was 2 different ones i did not understant, but later found out from someone that one of them was a bracket for the lower cowl i did not know about, kinda forgot too that it had a lower cowl(mine didnt come with one)

[Harvy]

what cause i didnt post a clear enough picture up when i was using a camera phone with no flash cause my camera broke? or the fact that i happen to misspell a couple of words?



and there is also a pressure clave and a special cleaner, not sure what its called but you can stick carbs or anything else in it and it basically spins it and cleans it.

that was the "something"

That's the way mate, NOW you're getting it.
See how much easier it is to read your post?
I don't want to see you get banned, I want to see you learn how to fix your bike, hang around and maybe meet some of the blokes here.
I come all the way over from Australia to ride with some of the jerks on this list mate, that's how cool they are.
Listen to what they have to say, you'll get a lot of help.

yea i see that now

ill start to listen more than i speak, hows that sound?

pat: yes i did agree to your terms and i plan on following them

Ok cool, now just sit back and be quiet..... Don't fuel the fire. Don't rebut anything. Let this thread develop on it's own.

alright

Who is George B of the forum?


Randy:

Im not trying to argue with anyone, but as it seems ive already made a rep for myself. Since im back the second time around all im trying to do is get my bikes up and running for rideing and racing purposes.

All i did this time was ask about a bracket on the 91 frame and then everything goes bad.

pat:

yes i did agree to your terms and i plan on following them

There is no need for you to know who George is. Others here may disagree.

Most folks here have a name (and use it). Irishluck is not yours (to my knowledge), so give us the pleasure of yours - you never know, a bit more harmony may follow.


Harvy

im nick

Good to meet ya Nick...... take heed of some of us old folks..... you're gunna do all right here.

Harvy

[1tinindian]

i do have a manual already though... reason why i was asking about the brackets is cause there was 2 different ones i did not understant, but later found out from someone that one of them was a bracket for the lower cowl i did not know about, kinda forgot too that it had a lower cowl(mine didnt come with one)

That would have been me, and you're welcome, Nick!

Leon

[tqmx1]

Who is George B

Ask racerman27410. The reply WILL be entertaining to say the least. Just be ready for the  

Kim

[Kopfjaeger]

Good to meet ya Nick...... take heed of some of us old folks..... you're gunna do all right here.

Harvy



but what about alzhiemers?    chuckles.... whats the expression... " cant put an old head on young shoulders?"    chuckles

[irishluck]

i do have a manual already though... reason why i was asking about the brackets is cause there was 2 different ones i did not understant, but later found out from someone that one of them was a bracket for the lower cowl i did not know about, kinda forgot too that it had a lower cowl(mine didnt come with one)

That would have been me, and you're welcome, Nick!

Leon

yes that picture actually helped me out alot! Thanks again.

figured out im missing a couple more brackets than i thought. gota see if i can find some used ones first, to expensive.

Who is George B

Ask racerman27410. The reply WILL be entertaining to say the least. Just be ready for the 

Kim

well now im kinda afraid to ask ha