News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

gas tank heat shield

Started by Fred, March 20, 2009, 08:54:19 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Fred

March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

Yamifj1200

#1
March 20, 2009, 09:12:26 PM
Quote from: Fred on March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

3M spray adhesive will work... hth

Eric M


http://www.fjowners.com/index.php?topic=14833.0


"All unattended children will be served an espresso and given a puppy"

Fred

#2
March 21, 2009, 10:26:48 AM
Quote from: Yamifj1200 on March 20, 2009, 09:12:26 PM
Quote from: Fred on March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

Yamifj1200

#3
March 21, 2009, 10:56:16 AM
Quote from: Fred on March 21, 2009, 10:26:48 AM
Quote from: Yamifj1200 on March 20, 2009, 09:12:26 PM
Quote from: Fred on March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

Check out your local Lowe's store and look at the spray adhesives. There are a few to choose from I used a high strength version..

Eric M


http://www.fjowners.com/index.php?topic=14833.0


"All unattended children will be served an espresso and given a puppy"

jamesearthdrum

#4
March 24, 2009, 05:48:05 PM
No. 77 very good  :good:
No. 90 will never come off  :good2:
peace:)james

"we often refuse to accept an idea merely because the tone of voice in which it has been expressed is unsympathetic to us."
~~~friederich nietzsche ~~~

rlucas

#5
April 09, 2009, 07:54:47 PM
Quote from: Yamifj1200 on March 21, 2009, 10:56:16 AM
Quote from: Fred on March 21, 2009, 10:26:48 AM
Quote from: Yamifj1200 on March 20, 2009, 09:12:26 PM
Quote from: Fred on March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

Check out your local Lowe's store and look at the spray adhesives. There are a few to choose from I used a high strength version..

Eric M

Or any NAPA store with 3M trim adhesive. I cheated and used foil-faced adhesive-backed pipe insulation, layered. So far (several years...), so good. Not optimum, but it works.

Rossi
We're not a club. Clubs have rules. Pay dues. Wear hats and shit.

"Y'all might be faster than me, but you didn't have more fun than I did." Eric McClellan (RIP '15)
Print
Go Up Pages1
User actions