News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

How to Fit a FZR1000 Front Wheel to a FJ1200

Started by bil2on, August 21, 2025, 12:35:54 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Pat Conlon

#1
August 21, 2025, 09:50:13 AM
We have several members who have used the '87/88 FZR rim with our oem Speedo drives with no problems, myself included.
A quick check on the part numbers shows that your ABS speedo drive is the same part we use on our non ABS bikes. Are you sure you seated the speedo drive correctly?
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Firehawk068

#2
August 21, 2025, 05:50:20 PM
There may have been something different going on due to yours being ABS originally? Not sure?
I fitted a '87/'88 FZR-1000 "Genesis" front wheel to my 1990 using all the FJ parts.
FJ center-spacer, FJ bearings/seals, FJ collar, FJ Rotors, and FJ speedo-drive.
Everything lined up perfectly where it was supposed to.
Mine was pre-ABS though. :drinks:
Alan H.
Denver, CO
'90 FJ1200
Print
Go Up Pages1
User actions