News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Clutch change.

Started by arendal, August 29, 2018, 11:28:52 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

arendal

August 29, 2018, 11:28:52 AM
Hi i just change the clutch friction plates on my fj 1100. But inside there was some Steel wire, holding the last Steel plate. The wire broke when try to mount again. What function Does it has? Can i just use ordinary Steel wire? See link below.

Nr 8 in this link.
https://www.cmsnl.com/yamaha-fj1100-1984-36y-europe-2536y-300e1_model37458/partslist/0016.html#.W4bINuB5N-F

FJmonkey

#1
August 29, 2018, 11:32:11 AM
That wire was used by the factory for assembly, it is no longer needed. Some find it already broken and mangled.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

RPM - Robert

#2
August 29, 2018, 11:33:37 AM
http://www.fjowners.com/index.php?topic=1808.0

The first post in this thread explains what to do with it.
Print
Go Up Pages1
User actions