News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

DATEL Digital Voltmeter installation

Started by karstenp, February 17, 2009, 09:33:29 PM

Previous topic - Next topic

karstenp

Has anyone installed a DATEL Digital Voltmeter on the FJ?  If so where did you install and do you have pictures?  I know of several FJR owners who have installed this device but I am not sure if there is adequate clearance on the side panels to install on the FJ.  Any other suggestions or pictures for voltmeter installations?

I am on my second Kuryakyn Battery Gauge.  These little suckers are $40.00 a pop and after my second failure, I am looking for a replacement.  The first one stopped working after a rainstorm.  A closer look at the unit leads me to believe that the waterproof capability is suspect.  The second unit just died after several months of use (will replace under warranty).

I like a voltmeter because I am running aux lights, GPS, heated grips, heated vest etc and I have to cycle my loads to avoid overloading the FJ charging system.

DATEL link:

http://www.digitalmeter.com/cgi-bin/webshop.cgi?config=configspc.txt

Kuryakyn Link:

http://www.motorcycle-superstore.com/0/1/123/8115/ITEM/Kuryakyn-LED-Battery-Gauge.aspx

Perry
92 FJ1200 - Ontario, Canada
07 FJR
IBA #411

racerman_27410

try this     

http://www.cyclegadgets.com/products/product.asp?Item=BOVOLT


i put one on my DRZ and its great.... can tell with a quick look what is going on with the charging system.

all you have to surface mount is one little LED


KOokaloo!

Frank

Yamifj1200

Quote from: karstenp on February 17, 2009, 09:33:29 PM
Has anyone installed a DATEL Digital Voltmeter on the FJ?  If so where did you install and do you have pictures?  I know of several FJR owners who have installed this device but I am not sure if there is adequate clearance on the side panels to install on the FJ.  Any other suggestions or pictures for voltmeter installations?

I am on my second Kuryakyn Battery Gauge.  These little suckers are $40.00 a pop and after my second failure, I am looking for a replacement.  The first one stopped working after a rainstorm.  A closer look at the unit leads me to believe that the waterproof capability is suspect.  The second unit just died after several months of use (will replace under warranty).

I like a voltmeter because I am running aux lights, GPS, heated grips, heated vest etc and I have to cycle my loads to avoid overloading the FJ charging system.

DATEL link:

http://www.digitalmeter.com/cgi-bin/webshop.cgi?config=configspc.txt

Kuryakyn Link:

http://www.motorcycle-superstore.com/0/1/123/8115/ITEM/Kuryakyn-LED-Battery-Gauge.aspx

Perry

Hello Perry, heres another option for monitoring your bikes voltage.
http://www.cyclegadgets.com/Products/product.asp?Item=BOVOLT
its small and very bright.... HTH

Eric M


http://www.fjowners.com/index.php?topic=14833.0


"All unattended children will be served an espresso and given a puppy"

karstenp

A single LED voltmeter....what a fantastic idea!....
92 FJ1200 - Ontario, Canada
07 FJR
IBA #411

racerman_27410

its kind of bright so put it where it wont blind you when riding at night..... it is trick  one glance will let you know everything you really want to know about the charging system.... like whether you are draining the battery or not..... i put one on the DRZ because i am running heated liner and gloves and still like the bike to start when i push the button   ;D


KOokaloo!

Frank