News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Knock knock...

Started by Carterc, June 07, 2011, 07:45:57 PM

Previous topic - Next topic

Carterc

So i started up my bike today and my father pointed out a knocking sound that was in tune with with the shaking of the engine, if that makes sense. Im assuming this is a big problem... Please inform.
1986 FJ1200

Travis398

does the sound go away or get worse when you ride it at higher rpm's?


When all you have is a hammer, everything looks like a nail.

Carterc

I have no idea, my bike is to loud to hear it, i can only audibly hear it when i idles
1986 FJ1200

andyb

Camchain, starter chain, loose engine mount.

Less likely but more expensive is a bearing someplace.

racerman_27410

what RPM is your idle set ?

the FJ likes to idle about 1100 RPM.... lower idle speeds can result in all kinds of weird (  but normal)  noises


KOokaloo!

Scooterbob

Loose exhaust possibly?  Cracked or loose fairing?  Trying to narrow down a knock or vibration on the FJ seems to be a "needle in a hay-stack" kind of thing.

Let us know what you find.   (popcorn)
Do not argue with an idiot. They will drag you down to their level and beat you with experience.


-----Bob G.-----

Carterc

rpm is set at 1100 and the knock is definitely in the engine, i put a long screw driver on the engine block and listened to it by putting my ear on the end of the screw driver (poor mans stethoscope). Also, today i took the bike to work and when i got here it was smoking from the engine..... I'm no mechanic and I'm about to give up on this bike, this is ridiculous.

Chris
1986 FJ1200

Travis398

As Andy and Frank said it's not very likely to be anything more than weird/normal noises. As far as the smoking goes, your bike is 25 years old, a small oil leak is nothing to panic over. It is pretty common for the rubber seals on the valve cover bolts to dry out and leak, be a shame to give up over a $3 rubber seal.


When all you have is a hammer, everything looks like a nail.

RichBaker

Quote from: Carterc on June 08, 2011, 11:43:08 AM
rpm is set at 1100 and the knock is definitely in the engine, i put a long screw driver on the engine block and listened to it by putting my ear on the end of the screw driver (poor mans stethoscope). Also, today i took the bike to work and when i got here it was smoking from the engine..... I'm no mechanic and I'm about to give up on this bike, this is ridiculous.

Chris

Even when properly set, the clutch basket and cams both rattle and clatter a bit at idle....
Rich Baker - NRA Life, AZCDL, Trail Riders of S. AZ. , AMA Life, BRC, HEAT Dirt Riders, SAMA....
Tennessee Squire
90 FJ1200, 03 WR450F ;8^P

nvmike24

 :music: have you synced the carbs? Low idle and carbs out of sync will make primary chain racket. I agree on the smoke issue, she be an old girl. Being loud does not prevent poor mans hearing aide from working. Bump the idle up to 1500-2000 and see what area you can find the noise loudest.

ps: what's the asking price? Just yankin your chain. Relax
Mike Sweeney
83 CB1000C, SOLD
84 FJ1100, in little pieces, for powder coating, FZR1000 Front
Fork Mod and Trans repair!
12 Road Glide Ultra

Carterc

thanks for all the help guys.

btw, the asking price is $1,000,000.00..... :rofl:
1986 FJ1200

Scooterbob

Quote from: Carterc on June 20, 2011, 12:31:30 PM
thanks for all the help guys.

btw, the asking price is $1,000,000.00..... :rofl:

Take a check?   :lol:
Do not argue with an idiot. They will drag you down to their level and beat you with experience.


-----Bob G.-----

Travis398

Quote from: Carterc on June 20, 2011, 12:31:30 PM
thanks for all the help guys.

btw, the asking price is $1,000,000.00..... :rofl:

I like that  :good:


When all you have is a hammer, everything looks like a nail.