News:

           Enjoy your FJ


Main Menu

New FJ1200 Owner

Started by FJTAS, December 06, 2014, 02:07:46 PM

Previous topic - Next topic

FJTAS

Just purchased 2hand 94 FJ1200 thats been in storage for 5 years
What a beast low k's all original spot on bike I have been hanging out for one of these for a while to add to my collection of toys.
Live in the South West of Tasmania twisty touring heaven.

Couple of things the machine has original stock silencer's after rego whats an alternative as it sounds like a vacuum cleaner with the standard oem pipes and mufflers? slips on cans the go? or best to lash out with a 4-1 stainless system & cans?  If so where do I get them from?  The rubber is 5 Years old but hardly worn anyway I shall replace with new rubber whats the best choice?

Cheers


FJmonkey

Quote from: FJTAS on December 06, 2014, 02:07:46 PM
Just purchased 2hand 94 FJ1200 thats been in storage for 5 years
What a beast low k's all original spot on bike I have been hanging out for one of these for a while to add to my collection of toys.
Live in the South West of Tasmania twisty touring heaven.

Couple of things the machine has original stock silencer's after rego whats an alternative as it sounds like a vacuum cleaner with the standard oem pipes and mufflers? slips on cans the go? or best to lash out with a 4-1 stainless system & cans?  If so where do I get them from?  The rubber is 5 Years old but hardly worn anyway I shall replace with new rubber whats the best choice?

Cheers

Don't ride on the old rubber unless its to get up and down the drive at low speeds. I know of too many riders go down due to old tires that looked good. Slip-on pipes can give you better sound. And performance if you also upgrade to better air filters like the UNI dual pods. But you will have to make some minor carb changes like jetting and raising the needles. If adding just slip-on pipes then don't worry if you can stay on stock jetting with the OEM air box. I liked the Suppertrapp slip-on pipes till I went and got the RPM system, very nice, very happy with it.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

movenon

Welcome ! As mentioned,  inspect and change out the rubber items. The FJ is old but not short of performance.  Ask questions as you go. There is lots of good help and information here. Be aware that some if not most of the 4 into 1 exhaust systems for the FJ block the oil drain plug and makes it more of a chore to change oil. Lots of good slip on's on the market.
George  :drinks:
Life isn't about having the best, but about making the best of what you have...

1990 FJ 1200

Urban_Legend

Hi and Welcome

Re: new exhaust to the FJ. I ordered a new 4-1 stainless system from RPM (FJ specialist in the USA) for about $1200 Delivered (I live in Grafton NSW) they are a very nice system and so they don't obscure the sump plug (very important for oil change time.) Randys ads (RPM) are all over this forum. I have had 3 large orders from him and they took about 14 days to arrive here in Oz.

Mark
Mark
My Baby (Sparkles)
84 FJ1100/1200 motor
92 FJ 1200 - Project bike. Finished and sold.
84 FJ1100 - Project bike.

Timbo-1

Welcome and welcome to the machine.. :good2:
+ one for the other advice but don't forget the original headers are stainless and polish up real nice if have have the time.... :good2:
Cheers Timbo.
Life's been good to me so far....

aviationfred

Quote from: FJTAS on December 06, 2014, 02:07:46 PM

Couple of things the machine has original stock silencer's after rego whats an alternative as it sounds like a vacuum cleaner with the standard oem pipes and mufflers? slips on cans the go? or best to lash out with a 4-1 stainless system & cans?  If so where do I get them from?  The rubber is 5 Years old but hardly worn anyway I shall replace with new rubber whats the best choice?

Cheers




Not knowing the expense that you want to spend. Here is a listing on eBay  for a New set of slip-on cans from Poland that ships to Australia.

http://www.ebay.com/itm/111513164237?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

For a full system, this is the ticket. The RPM, 4-2-1 allows for access to the oil drain plug, is stainless steel, choice of 4 different cans, and weighs next to nothing.

http://rpmracingca.com/proddetail.asp?prod=RPMHeader

I have this exhaust with the Titanium can on my FJ.







Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

roverfj1200

Welcome in FJTAS.

All good advice here. There is a thread here on opening up the stock cans somewhere if you would like to keep the stock look. New rubber NOW...

And enjoy those Tas roads..

Cheers.
1988 FJ1200
1991 FJ1200

Richard.

The General

 :hi: Welcome FJTas. Hoping to get down your way in a year or two. Pretty rare the 94 model. There`s at least two more FJ lurkers on your island. Don`t forget to fill in a Zeemap address.
Do ya get a local discount on that ferry? :drinks:
`93 with downside up forks.
`78 XS11/1200 with a bit on the side.
Special edition Rocket Ship ZX14R Kwacka