News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

FJ1200 lower fairing(looking for one)

Started by jkstx450, March 13, 2011, 02:41:37 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jkstx450

March 13, 2011, 02:41:37 PM
 :good2:Just wondering if there is any place in USA or Canada to buy a after market lower spoiler,or a used one.I found a place over sea,but was hopping the web site here could help me out.I check at my local Yamaha dealer and he told me they are on back order and will cost around $325.00,hoping to find one cheaper than that.
Thanks Jkstx450

Mark Olson

#1
March 13, 2011, 03:11:03 PM
what year? color?
Mark O.
86 fj1200
sac ca.

                           " Get off your ass and Ride"

FJmonkey

#2
March 13, 2011, 03:58:55 PM
Quote from: jkstx450 on March 13, 2011, 02:41:37 PM
:good2:Just wondering if there is any place in USA or Canada to buy a after market lower spoiler,or a used one.I found a place over sea,but was hopping the web site here could help me out.I check at my local Yamaha dealer and he told me they are on back order and will cost around $325.00,hoping to find one cheaper than that.
Thanks Jkstx450
Checkout compositecrafters@yahoo.com, they offer a fiberglass chin fairing for the 86/87 for $125.00 (unpainted). I found them on Fleabay.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

jkstx450

#3
March 13, 2011, 06:32:45 PM
Quote from: Mark Olson on March 13, 2011, 03:11:03 PM
what year? color?
I am going to put the lower on my 1985 FJ1100, so color dose not matter and for year i will take what ever I can get.
Thanks

tqmx1

#4
March 13, 2011, 09:28:25 PM
Well if you are going to put it on a 1100 the 1200 lower will not fit (unless you get the lower frames off a 86/90 1200) the 1100 was all into it self on the lower fairing.

jkstx450

#5
March 14, 2011, 09:21:34 AM
Quote from: tqmx1 on March 13, 2011, 09:28:25 PM
Well if you are going to put it on a 1100 the 1200 lower will not fit (unless you get the lower frames off a 86/90 1200) the 1100 was all into it self on the lower fairing.
Well i did this to my 1984 FJ1100 back in 1990 all i did was fab some brackets tig welded them in place and powder coated the lower frames looked like they were done at the factory,This is not a hard thing to do.
Print
Go Up Pages1
User actions