News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

85 FJ1100 Mirror Fix !!

Started by DreadRock, October 08, 2013, 11:49:13 AM

Previous topic - Next topic

DreadRock

  Been slowly updating my 85 FJ1100 lil at a time thanks to you guys and i couldnt be more happy with it so far  :good2: So i was wanting to change the mirrors on it as i dont like the stock placement of the mirrors. After reading what alot of guys did to the 1200 mirrors i thought i would give it a try as i couldnt find much on a 1100 fix .
  So i started out with aftermarket CBR1000rr mirrors that where cheap to just see what i can come up with  :unknown: Well with the 1100 there mounted on the levers not the fairing which i dont like so had to figure how to mount them with out messing up the fairing . So pulled the fairing off and the cluster out to have a look ! Thought i could use the first two holes where the windscreen bolts are and add Alum back plates with expoy to keep it firm . After picking up some Alum and doing some cutting and shapeing got them mounted and well they looked ok and strong BUT just did not like the look or angle . Also couldnt get the Alum thin enough to get a good clamp down on the mirrors them self  :negative:
  So then did some talking and reading and looking and found what i hoped would work ! Well found the a SV1000 had what i needed and might just be the fix ,so called on local bike salvage and found a good set i think are off the SV but not sure . Am sure the mounts are the same so for 20 bucks for good OEM mirrors i was game !  :good2: Well with lil work they fit PERFECT  :drinks: Only thing i had to do was drill ( very hard to do ) one hole for mounting but couldnt be happier about it ! Took the bike out over the weekend and they work great very lil vibration at 100mph do should be good to go ! Next will be updating frontend forks,wheel,brake and update rear wheel ,brakes !

  Here are a few pics on the project ...









FJ_Hooligan

So is there anything reinforcing the fairing on the backside of the mount?
DavidR.

DreadRock

Quote from: FJ_Hooligan on October 08, 2013, 11:55:19 AM
So is there anything reinforcing the fairing on the backside of the mount?

Yes I have Aluminum stock behind fairing the bolts go thru that are Epoxy in place to spead the load over bigger area !

DreadRock

  Update on mirror fix: Did a 800+ mile ride over the weekend and have to say the mirrors work out great . Had good view around my arms and was at ever speed from city to highway speeds and couldnt be more happy with it !  :yahoo: