Text only | Text with Images

FJowners.com

General Category => Modifications => Topic started by: Goetz on May 16, 2013, 05:18:31 PM

Poll
Question: Upgrading to new clutch brake m/c
Option 1: Fjr votes: 2
Option 2: Nissin radial votes: 1
Option 3: Brembo radial votes: 0
Title: contemplating upgrading the brake and clutch m/c to nissin or brembo radials
Post by: Goetz on May 16, 2013, 05:18:31 PM
But!!!! I notice on my '85, that the choke lever assy. is dependent on the interlock between the l/h switch housing and the clutch m/c. There is a protrusion off the m/c that the switch housing engages that keeps it still when the choke lever is engaged, keeping the whole assy. from spinning. Any thoughts? I imagine the fjr master would not have the stud either. Could i drill the bar and put a stud there?
Title: Re: contemplating upgrading the brake and clutch m/c to nissin or brembo radials
Post by: fj11.5 on May 16, 2013, 06:02:00 PM
I found out the same problem,  but due to changing fairings to start with, could you cut out the fairing panel and mount the later style choke,  the bracket is easy enough to make
Title: Re: contemplating upgrading the brake and clutch m/c to nissin or brembo radials
Post by: oldktmdude on May 16, 2013, 06:50:02 PM
Quote from: Goetz on May 16, 2013, 05:18:31 PM
. Could i drill the bar and put a stud there?
Yes. That's what I did.  Pete.   :i_am_so_happy:
Text only | Text with Images