News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

NO NO NO

Started by racerrad8, May 18, 2013, 08:16:15 PM

Previous topic - Next topic

racerrad8

Well,

I am working on a customers bike in preparation for the WCR. One of the tasks is to adjust the valves no problem I say...

The I found this when I removed the tank and pressure washed the engine to get all of the oil off.


The valve cover was literally glued on and had to be pried off with a screwdriver.


Here is the glue on the head of some of the bolts and chain guide that got slimed when it was being put together.



Here is the bottom of the valve cover and the hangers that are still stuck to the gasket.





Here are a few of the hangers from the inside of the engine that I was able to just lift off from the interior of the engine.


I think I am going to pull the pan too and make sure the pick-up screen is not full of the glue too.

Please do not use any type of sealant on the valve cover gasket. It is a rubber gasket that is the seal, not the glue. The seal is also controlled by the valve cover bolt grommets. If they are hard, then the valve cover gasket will leak.

The has been a public service message from RPM

Randy - RPM
Randy - RPM

fj11.5

Wow, that's dodgy, about all I use is a smear of rtv on the rounded portion on the gasket sides
unless you ride bikes, I mean really ride bikes, then you just won't get it

84 Fj1100  effie , with mods
( 88 ) Fj 1200  fairly standard , + blue spots
84 Fj1100 absolutely stock standard, now more stock , fitted with Fj12 twin system , no rusted headers for this felicity jayne

aviationfred

Old school 70's and 80's car valve cover mentality. May be OK for an old V-8. Not so good on an FJ.

Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

movenon

Quote from: fj11.5 on May 18, 2013, 08:20:52 PM
Wow, that's dodgy, about all I use is a smear of rtv on the rounded portion on the gasket sides

+1 A very little dab will do. If properly TQ'ed down they will last for a long time. Reused mine at least 3 times now and still no leaks...
George
Life isn't about having the best, but about making the best of what you have...

1990 FJ 1200

racerman_27410

Dang thats nasty..... i bet the pickup screen is covered...... dang good thing it didnt starve for oil and blow up!


KOokaloo! (without all the goop please)  :good2:

Rhino

yeah that sucks
i had an old vision that the po did the same sort of job with excess rtv
eventually the the excess broke loose and clocked the pickup and she ran dry suddenly at 80kph (50mph?)

interesting having the back wanting to overtake going down a hill at that speed

baldy3853

 :shout: F###witt  cannot believe any one could be that stupid  :crazy:
Baldy

Rhino

I'll always put my hand up for being stupid, but i'd never do that.

rtv is like vegemite on toast, not jam

fj1289

Someone's going to catch a lot of crap at the rally!  Should all be fun!

Yamifj1200

just goes to show "no on can fuck you like you can fuck yourself."  Would you try to fly a plane with out instruction?? no... why not take the time to learn how to work on your bike properly, before you make big mistakes and destroy your ride.. Some folks just don't get it....


Eric M


http://www.fjowners.com/index.php?topic=14833.0


"All unattended children will be served an espresso and given a puppy"

FJmonkey

Sounds like a "Drinks Bitch" nomination to me.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

aviationfred

I have no idea who the owner is. Before the member gets fully roasted over the proverbial camp fire. A little roasting during the WCR maybe.  :dance2:

Could it be possible that the offending person is the PO of said FJ that performed this heinous act????

Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

Mark Olson

Whoa fellas , put the pitchforks and torches down.

This "goo job" was the act of the previous owner of the fj in question.   

Mark O.
86 fj1200
sac ca.

                           " Get off your ass and Ride"

FJmonkey

Quote from: Mark Olson on May 19, 2013, 01:22:22 PM
Whoa fellas , put the pitchforks and torches down.

This "goo job" was the act of the previous owner of the fj in question.   

Well that just throws a wet blanket on the whole thing.... I am sure other opportunities will come along between now and the rally.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

Mark Olson

cheer up Monkey , how's your potato cannon proof vest coming along? :biggrin:
Mark O.
86 fj1200
sac ca.

                           " Get off your ass and Ride"