News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Prospect purchase

Started by fintip, October 04, 2012, 12:43:34 AM

Previous topic - Next topic

Big D

Mate, sounds like a real adventure, I could tell you all the reasons what you're doing is foolhardy and risky, but where's the fun in that... I have done much the same in my early days. Now I'm old and feral, I'll just read about you doing it thanks.
1981 Kawasaki Z650 restored
1987 Yamaha FJ1200 dead
1985 Yamaha FJ1200 work in progress

Go that way really fast, when something gets in your way, turn

ribbert

Quote from: fj11.5 on November 01, 2012, 05:38:24 AM
Quote from: ribbert on November 01, 2012, 05:34:34 AM
Quote from: fintip on October 31, 2012, 10:21:05 PM
I had already seen it and hoped I was wrong in assuming that was it. Alas. That's quite a pain to access, haha. Was planning on doing it soon. Clockwise pushes the idle up, correct?



Kyle, the easiest way and the one with the most control is with a gloved hand.
The trick is to open the throttle slightly to take the load off the screw so it turns easily, same if you want to use a screw driver, which I find a pain.
I can, and have, adjusted mine while at a red light.
Noel
,, yep easy to adjust,  even at lights, , pays to have small hands, even with summer gloves on

I've got mechanics hands and wear 2 - 3 XL gloves
Noel
"Tell a wise man something he doesn't know and he'll thank you, tell a fool something he doesn't know and he'll abuse you"

Tiger

 :hi: Nice going...Now, while the gremlins are off chasing someone else, get her packed up, wound up and head for home...:good2:

John... (popcorn)
Life should not be a journey to the grave with the intention of arriving safely, in an attractive & well preserved body...but rather to slide in sideways, body completely worn out and and with your last dying breath screaming, "HOOOYA LIFE, lets try that again"!!!

SlowOldGuy

Kyle,
If grounding the Blue w/White Stripe wire will spin the starter, then you won't have to take off the fairing. 
All you'll need to do is connect a switch to the Blue/White wire and run the other end to ground.  A monentary contact switch will work just like your starter button should.  Use a long wire and tape the switch to the handlebar for convenience.

You can also hook all your switches back up.  I think you've proved that they aren't the problem.

DavidR.

movenon

Life isn't about having the best, but about making the best of what you have...

1990 FJ 1200

Goetz

Now MY wanderlust is acting up.

Steve_in_Florida

Quote from: Goetz on November 01, 2012, 02:04:22 PM

Now MY wanderlust is acting up.


I know what you mean. I did the same thing as FinTip when I bought my `92 FJ ABS.

Found it on E-Bay while looking for parts for my `90 FJ project. She was located in Madison, Wisconsin, and I'm in Orlando, Florida. Chat with owner about condition, title, and price, then found a cheap round-trip plane ticket (just in case...). Made the flight, owner picked me up and put me up for the night, then we signed the bike over at the bank the next morning. Rode her home over that weekend, by way of the Dragon. Loving her ever since.

This could be the start of an "adventure trend". With a limited budget, there are just so many "unknowns" to make the prospect uber-exciting! Shoot, even with an unlimited budget, it beats hiding from the world watching television!

Ride on, Mr. FinTip!

Steve
`90 FJ-1200
`92 FJ-1200

IBA # 54823

fintip

 :hi:

So, the weather is cloudy with patches of sky, no rain today!

Went out and did the oil change (which is a BEAR to do without an extension socket for the ratchet... Sheesh...), changed the oil filter, oiled up the chain, put the side cover pieces of the fairing back on, starts and warmed her up well...

Then I geared up and took off. Went around town for a few miles, lights and stop signs. Finally found the highway.

Then I came back. It was a 35 mile trip. No problems. Bike has a happy idle of 1250~ when properly warmed up, and will come back down to it without hesitation at any given stoplight.

Getting back on the highway after a u-turn from a dead stop, I got to feel the incredible acceleration of the bike. In other words, today I learned the meaning of the word "kookaloo".  :biggrin:  :yahoo:

No problems to report. About to go hook up the givi rack mount.

Oh, and I tried the blue and white wire. That starts the bike. So the main relay solenoid is good. Just need to buy a switch and wire it up.

Thank you, everyone, for your help and encouragement so far. Now it's time to enjoy the west coast!

fjowners.wikidot.com

Not everyone understands what a completely rational process this maintenance of a motorcycle is. They think it's some kind of a knack or some kind of affinity for machines in operation. They are right, but the knack is almost purely a process of reason.
-ZAMM

IBA:54952

SlowOldGuy

Quote from: fintip on November 01, 2012, 03:45:08 PM
Oh, and I tried the blue and white wire. That starts the bike. So the main relay solenoid is good. Just need to buy a switch and wire it up.

Excellent!  The cut-out relay is probably bad.  I'm pretty sure that can be replaced with a standard $5 relay from the auto parts store.  I'll look into the wiring and post it.

Good luck and ride safe!

DavidR.

Ranman85FJ

I love this thread, and the video!  Congrats Kyle, for making great progress in spite of our weather (we had almost eighty days without rain recently, sorry you missed it!).  I saw your bike on Craigslist and considered it, but was scared off by the thought of electrical problems.  Kudos to you for taking it on, and good luck on your trip.  You must make it to Canada, especially if you're single!  The most beautiful ladies in the world live in British Columbia!  :good2:
1985 FJ1100
1991 FJ1200

fintip

Oh, one thing I didn't mention is that my fuel and speedo gauges were wacko. Fuel gauge I never put much stock in, but I would like to have a working speedo. That said, I can use my tablet as a GPS speedo once I figure out how to mount it on the dash, so it isn't the most urgent issue, but what am looking at? It was bouncing around back and forth between 120 and 30 or something as if it were a see saw run by 4 year olds on sugar...

Re: relay, that'd be amazing good news. Let me know what you find, David.

Concerning Canada, maybe I'll try and make it across the border this weekend. But honestly I'm too broke to enjoy it properly right now. Hard to get a girl when you can't afford to buy her a drink, you know. Whether I go this time or not, I'll defnitely have to come another time. As for weather, I keep hearing that from everyone. Thanks for rubbing it in, haha. It's weird, I'm stating to think the rain follows me... it's a recurring theme in my motorcycling adventures...

Thanks for the encouragement!

Oh, and the kickstand switch definitely works. Killed the bike while I was parking to put the kickstand down while in gear. (I don't think it should work that way, since I had the clutch pulled, so I might have reversed the clutch switch wires...)
fjowners.wikidot.com

Not everyone understands what a completely rational process this maintenance of a motorcycle is. They think it's some kind of a knack or some kind of affinity for machines in operation. They are right, but the knack is almost purely a process of reason.
-ZAMM

IBA:54952

SlowOldGuy

No, that's exactly what the kickstand switch is supposed to do.

If the kickstand is down and the motor is running, if you put it in gear, the motor will die.  Won't even crank if the stand is down.  Also won't crank if the kill switch is in the "kill" position.

The sidestand relay grounds the ignition system (i.e. kills it) to keep you from riding off with the stand down.  It's working correctly.

Also, it doesn't matter if you reverse the wires on one of the switches.  The switch is just a break in the wire, doesn't matter which wire is attached to the switch connectors.  You're doing good, keep it up!

DavidR.

Tiger

Life should not be a journey to the grave with the intention of arriving safely, in an attractive & well preserved body...but rather to slide in sideways, body completely worn out and and with your last dying breath screaming, "HOOOYA LIFE, lets try that again"!!!

fj11.5

your speedo sounds like the one on my 89, likes to bounce around too, , 2000 rpm should be about 60klm/h ,, 4,200 about 100 kmh / 55 mph ?? if you have standard gearing ect,,   in top  for both,,  could be your speedo cable needs a heavy oil to slow the bounce   :scratch_one-s_head:
unless you ride bikes, I mean really ride bikes, then you just won't get it

84 Fj1100  effie , with mods
( 88 ) Fj 1200  fairly standard , + blue spots
84 Fj1100 absolutely stock standard, now more stock , fitted with Fj12 twin system , no rusted headers for this felicity jayne

fintip

It looked like 60mph (fish, see speedo problem) was about 3000 rpm in 5th. Didn't have my GPS tracking it. Tachometer appears to be working properly... is this a mechanical or tci connected tach?

Taking a day trip to Canada on the motorcycle on Saturday if my friend finds a helmet he can borrow, otherwise we're going in his car. Then I leave for Portland Sunday.

Finished installing the givi rack today, didn't have time before. Packing stuff up right now.

Maybe I'll just go do a day trip myself to see Mt. Rainier...
fjowners.wikidot.com

Not everyone understands what a completely rational process this maintenance of a motorcycle is. They think it's some kind of a knack or some kind of affinity for machines in operation. They are right, but the knack is almost purely a process of reason.
-ZAMM

IBA:54952