News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Indicator Query

Started by eddohawk, July 10, 2012, 02:39:14 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

eddohawk

July 10, 2012, 02:39:14 PM
Hello again

A while back I replaced a blown front indicator globe with an oem globe from my local dealer. Since then both front and rear indicators are flashing more quickly than previously and I was wondering if the flashing unit is the problem....

Thanks in anticipation.

Mark

andyb

#1
July 10, 2012, 03:17:58 PM
A digital/fixed rate flasher relay will fix that.

RichBaker

#2
July 10, 2012, 08:38:07 PM
Check the grounds for the indicators....  I had an open wire, inside the insulation and right at the connection to the socket, it was flashing fast. It was using the other filament as a path to ground, so it still flashed....
Rich Baker - NRA Life, AZCDL, Trail Riders of S. AZ. , AMA Life, BRC, HEAT Dirt Riders, SAMA....
Tennessee Squire
90 FJ1200, 03 WR450F ;8^P

racerman_27410

#3
July 10, 2012, 08:41:35 PM
Quote from: RichBaker on July 10, 2012, 08:38:07 PM
Check the grounds for the indicators....  I had an open wire, inside the insulation and right at the connection to the socket, it was flashing fast. It was using the other filament as a path to ground, so it still flashed....


+1   


KOokaloo!
Print
Go Up Pages1
User actions