Triple trees that take a 43mm fork?

[candieandy]

Hey guys. i need to fix an alignment issue i found on my front end. i had the original fj triples machined to fit FZR1000 forks which are 43mm. now i found total alignment of the wheel to the forks is slightly off, and im not going to make spacers. i was thinking of just buying the FZR1000 triple, but was wondering if anyone knew any other triples that accpet a 43mm fork tube?

thanks,

Andrew

[rktmanfj]

R6, IIRC

[FJ111200]

XJR1200 and 1300.  I know 'cos i've got one.

[tqmx1]

G1 FZ1 and I think the FZ6 was also 43MM. And they also have the correct stem for the FJ

[FJ111200]

And they also have the correct stem for the FJ

That's what i should have said aswell.

[Harvy]

Andrew....that's a bummer mate.
I did my OEM triple and top clamps when I put the FZ1 forks in and I guess luckily for me have no alignment problems...... I guess you won't be using that machinist again!

Harvy

[candieandy]

thanks everyone for the help. i will start looking for one of those triple trees.

andrew

[candieandy]

anyone know if the r6 triples have the correct stem?

[bcguide]

I have spent several nights at work looking for fork swaps and have found  lots of info at this

http://www.customfighters.com/forums/forumdisplay.php?f=294web site

Scott

[tqmx1]

anyone know if the r6 triples have the correct stem?

They should be the same. The bearing jam nuts are the same as the FJ stem. So if you have one lined up grab it.