Lets try this again

[tqmx1]

And I say again

Well, From your last statement go over your Grounds (Earths for the euro set). The horn gets power from the ignition switch then to the Horn and from there to the switch and last stop ground. Where ever the bad grounding problem lies is the root of all your problems.

As for the no crank, Engine in gear and kick stand down.

[simi_ed]

And I say again
<snip>

I see a long, exasperating carb electrical thread in our future...

Not if no one replies ...

[andyb]

I see a long, exasperating carb electrical thread in our future...

The future is now.

[1tinindian]

I thought this guy had this half-breed FJ listed on craigslist?
Must of had no takers.

[Klavdy]

Nick, you have already identified your problem in your own posts.
Can you not see what it is?
It is staring at you, plain as day, right there in front of you.
Give a man a fish,,,

[irishluck]

I thought this guy had this half-breed FJ listed on craigslist?
Must of had no takers.

mmm no i never listed my bike on there

Nick, you have already identified your problem in your own posts.
Can you not see what it is?
It is staring at you, plain as day, right there in front of you.
Give a man a fish,,,

Im checking all of that, im taking the feed back and i might have found something. First off i used an ohm meter on the grounds and it seems to be okay,

I went and tested the power on one of the blinkers from the flasher and its not getting any power when the others are?

and like i said before, idk if this happens to all fj's or just mine but when one blinker dont work they all dont on mine

i figured out the engine thing, i bypassed the kickstand sensor and it cranks, so one problem down!

[1tinindian]

I thought this guy had this half-breed FJ listed on craigslist?
Must of had no takers.

mmm no i never listed my bike on there
 

In this thread, the picture posted in the craigslist ad matched the picture you posted on the FJ you are working on.
http://www.fjowners.com/index.php?topic=4431.msg39090#msg39090

[irishluck]

I thought this guy had this half-breed FJ listed on craigslist?
Must of had no takers.

mmm no i never listed my bike on there
 

In this thread, the picture posted in the craigslist ad matched the picture you posted on the FJ you are working on.
http://www.fjowners.com/index.php?topic=4431.msg39090#msg39090

ok cool! if it was, it was, if it wasnt it wasnt, who cares? whats ya piont? i still have it

[oldktmdude]

  "ok cool! if it was, it was, if it wasnt it wasnt, who cares? whats ya piont? i still have it"


Integrity and Creditability?

[irishluck]

ok so since everyone wants to bash my last two post, we'll just make a 3rd one

Put new left handlebar switch on my 87 fj1200
and brand new single filament bulbed turn signals on the bike.

No blinkers will blink and my horn doesnt work at all.

They worked before i changed this stuff and then i put the old stock back on and then nothing worked still

So far i've checked the ground between the connections and it seems that they are all good

I also checked the power of all wires into the flasher relay and there getting power.
My headlight comes on just fine though

The new handle bar switch is a universal K&S switch

[FJ111200]

well i didnt get a fj switch, its a universal switch i got from work

http://www.kandstech.com/pimages/12-0030.html

Small point about the indicators.
On this universal switch that you got, the information says "LED indicators   NO". 
Does that mean leds won't work with this switch?  I don't know.

[FJ111200]

Do all the wires from the switch correspond with the wires in the loom/harness?

[Travis398]

I thought this guy had this half-breed FJ listed on craigslist?
Must of had no takers.

mmm no i never listed my bike on there
 

In this thread, the picture posted in the craigslist ad matched the picture you posted on the FJ you are working on.
http://www.fjowners.com/index.php?topic=4431.msg39090#msg39090

ok cool! if it was, it was, if it wasnt it wasnt, who cares? whats ya piont? i still have it

hmmm I think this is the point

Ok, so help us help you....Deal?  Here are the conditions:

1) No more lying, it just pisses us off. We eat/sleep/breath FJ's so you're not gonna get away with it.   
2) No more shit pictures.
3) Ask your questions clearly, use punctuation and spell check.
4) Give us details so we don't have to guess or assume or ask you further questions in order to figure out what the fuck you are asking.
5) It's ok to ask (polite) questions about the advice we give you...that's cool with me at least...but DON"T FUCKIN ARGUE.

okay deal, ill follow your guys rules.

How soon we forget

[irishluck]

talking about the new handlebar switch correct? if so then yes.




"Small point about the indicators.
On this universal switch that you got, the information says "LED indicators   NO". 
Does that mean leds won't work with this switch?  I don't know."



Just saw this and i did read that. But also at the moment there all just regular bulb turn signals and what not. no LED's

[irishluck]

who cares? me popping my bike on there for like a week just to see if i could get anything out of it is no ones business on here, its mine and thats it! i didnt even member sticking it on there.