News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

What happened to fella who was making 6061 blocks for these FJ engines...

Started by JMR, September 02, 2011, 11:05:29 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JMR

September 02, 2011, 11:05:29 PM
...or is it a sore subject? I make them for the SOHC CB750's for 1000cc displacement.
  Mike

Pat Conlon

#1
September 02, 2011, 11:26:07 PM
Rodney Mumford owner of Pro Chassis Cycle makes the 1400-1500cc FJ big block for drag bikes..
Here's Rod's web page with the FJ big blocks: http://www.prochassiecycle.com/COMMING_SOON.html

Drag bikes only. Too thick, not enough cooling fins for the street.  Cheers!
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

JMR

#2
September 03, 2011, 07:54:37 AM
 Thanks Pat. I thought he originally made the cylinders out of billet....those are cast pieces that are machined. Mine are billet and are heavily finned...they are for 1000cc displacement SOHC CB's, This link shows one.  http://jmrporting.com/?page_id=34

andyb

#3
September 03, 2011, 09:27:37 AM
He's really hard to get a hold of, or at least was when I tried to contact him, also.

Print
Go Up Pages1
User actions