The RPM website is up & running

Flynt · March 01, 2011, 10:00:52 PM

Site is great Randy, but $35 for a carb rebuild kit with all jets, air correctors, emulsion tubes, needle/seat, gaskets, orings, etc... that can't be right? Who's checking the data?

Flynt

Marsh White · March 01, 2011, 10:58:02 PM

Quote from: 1tinindian on March 01, 2011, 08:37:43 PM
Very cool site, guys..

Randy, I'd like to see some video of the LED tail light and blinkers in action.

What do you think?

Leon

Leon, he just put up a video!
http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3ALEDSMKBL%2DTS

Marsh White · March 01, 2011, 11:01:10 PM

Quote from: Flynt on March 01, 2011, 10:00:52 PM
Site is great Randy, but $35 for a carb rebuild kit with all jets, air correctors, emulsion tubes, needle/seat, gaskets, orings, etc... that can't be right? Who's checking the data?

Flynt

The price is right! Randy just rocks...that's all!

(note: that price is per carb body - 4 kits required for the whole carb assembly)

Flynt · March 01, 2011, 11:04:37 PM

or pay $35.94 for an emulsion tube... I guess I need 4 carb kits.

Flynt

Flynt · March 01, 2011, 11:08:41 PM

Oh yes... and I know Randy ROCKS!!

I'm gonna need that tail light as well Randy.

Flynt

racerrad8 · March 01, 2011, 11:10:51 PM

Quote from: Flynt on March 01, 2011, 11:04:37 PM
or pay $35.94 for an emulsion tube... I guess I need 4 carb kits.

Flynt

These are the new kits I was speaking of a couple of months ago. I am still having a little bit of supply issue at this point and only have to sets listed on the site.

They promise me they are headed my way, but to date I am still waiting. Hopefully once the bugs get worked out I will be able to supply them without issue.

It was quite a shock to me when I started getting the pricing for what was needed to make the kit in comparison to the O.E. Yamaha/Mikuni parts.

Randy - RPM

racerrad8 · March 01, 2011, 11:47:11 PM

Quote from: Marsh White on March 01, 2011, 11:01:10 PM
The price is right! Randy just rocks...that's all! (note: that price is per carb body - 4 kits required for the whole carb assembly)

Don't forget about the Stainless Steel Screw & O-ring kit when doing carbs.

Randy - RPM

1tinindian · March 02, 2011, 12:28:11 AM

Quote from: Marsh White on March 01, 2011, 10:58:02 PM
Quote from: 1tinindian on March 01, 2011, 08:37:43 PM
Very cool site, guys..

Randy, I'd like to see some video of the LED tail light and blinkers in action.

What do you think?

Leon

Leon, he just put up a video!
http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3ALEDSMKBL%2DTS

OK, well that was pretty f_cking cool Marsh, Thanks!

Leon

simi_ed · March 02, 2011, 12:50:51 AM

Cool light! I'm gonna need one ...

Klavdy · March 02, 2011, 05:21:08 AM

You done good.

Flynt · March 02, 2011, 08:38:22 AM

I just did Klavdy's old carbs... the E-tubes are ovals, so I need to replace them. The other stuff will be for the next FJ I guess.

Buster · March 02, 2011, 09:49:46 AM

Nice

Dan Filetti · March 02, 2011, 10:45:01 AM

Quote from: Flynt on March 02, 2011, 08:38:22 AM
I just did Klavdy's old carbs... the E-tubes are ovals, so I need to replace them. The other stuff will be for the next FJ I guess.

I gotta figure that at some point, this becomes entirely your bike as opposed to "Klavdy's" or "Klavdy's old bike". I'm reasonably certain the ink is dry on the paperwork by now.

Unless you're bitching about the PO, in which case, it's definitely Klavdy's...

Just saying.

Dan

Edit: changed 'your' to 'you're' etc. lest I incur the wrath of a certain spelling fixated Aussie

moparman70 · March 02, 2011, 11:31:04 AM

in agreement will all - very nice site -- great job Marsh -- site is bookmarked

FJ_Kevin · March 02, 2011, 12:31:01 PM

Terrific job! I am working on my list and will be placing an order soon!

Best of luck!
Kevin

News:

The RPM website is up & running