3XW - Rear Linkage Parts

[Pedals]

Good afternoon

Would anyone out there happen to know where I can get a Rear Linkage needle roller kit from somewhere in Oz?
They need doing but I seem to be chasing individual parts. Surely theres a kits/parts for these bikes that over lap other models?
If you know of a good sulier of parts I'd appreciate it. Thanks.

Padals

[Billy Bananahead]

You could try Yambits in the UK  https://yambits.co.uk/swing_arm_parts_for_yamaha_fj1200a.html
or CMSNL in Europe   https://www.cmsnl.com/yamaha-fj1200-1992-3xw5-europe-223xw300e1_model37948/partslist/0023.html
Might be a long shot posting to Oz but if you don't ask you don't get 

[Billy Bananahead]

There are no kits available as far as i know but any Yamaha dealer should be able to get the parts for you.
If you have no luck with any of the links i posted then i would be willing to post the stuff over to you as long as you tell me the exact parts that you need and you also pay for it.
There's this bearing which a lot of people ignore but will make your ride ten times better https://www.cmsnl.com/yamaha-fj1200-1988-3cv1-england-283cv310e1_model37555/bearing47x_9339999919/ 
but it's expensive from Yamaha so a lot of us UK lads buy this one > https://shop.marksman-ind.com/93399-99919-equivalent-yamaha-bearing-16228-p.asp
which is a tenth of the price.
Hope all this helps.
EDIT: Just done a quick search of the 3XW parts and notice the second bearing i listed is not used on that model. Sorry about that.

[Sparky84]

You could try Yambits in the UK  https://yambits.co.uk/swing_arm_parts_for_yamaha_fj1200a.html
or CMSNL in Europe   https://www.cmsnl.com/yamaha-fj1200-1992-3xw5-europe-223xw300e1_model37948/partslist/0023.html
Might be a long shot posting to Oz but if you don't ask you don't get 

They post quite quickly to Aus.

Good afternoon

Would anyone out there happen to know where I can get a Rear Linkage needle roller kit from somewhere in Oz?
They need doing but I seem to be chasing individual parts. Surely theres a kits/parts for these bikes that over lap other models?
If you know of a good sulier of parts I'd appreciate it. Thanks.

Padals

G'day Pedals/Padals ?

Look at part numbers above in Billy B link to CMSNL and ring local Yamaha dealer or if someone has the sizes of those bearings you could get some from another supplier and matbe cheaper.

No Kit as such, just individual components.

[Pedals]

Thank you, I'll delve into this.