Does the FJ1200 rear sprocket fit the YZF600 sprocket carrier?

[bikerjimbob]

Hi All,

Nearly got everything I need for the rear wheel YZF600R conversion, wheel, disc, sprocket carrier, caliper  perch, spacers. need to get the cush rubbers (I guess the 1200 one's wont fit?) will the original fj1200 sprocket fit? as all the bits are in the post still, I cant check until they arrive but if anyone know it means I can order one now if needed.
Thanks in advance
Jim

[bikerjimbob]

The wheel has arrived today, so I now know the FJ sprocket doesn't fit or the cush rubbers  

[Pat Conlon]

I just put a YZF600 rim on my '89 and I reused my oem sprocket just fine.
I did flip it so the sprocket smooth face was on the outside and the offset side on the inside.

I also reused the cush rubbers. I used silicone spray to help seat the cush hub.

[bikerjimbob]

I just put a YZF600 rim on my '89 and I reused my oem sprocket just fine.
I did flip it so the sprocket smooth face was on the outside and the offset side on the inside.

I also reused the cush rubbers. I used silicone spray to help seat the cush hub.

You are so right Pat I was checking the dimensions of the wrong sprocket, what an idiot