Heating your workspace

[giantkiller]

Manifolds I made for driveway.  3 zones.

[giantkiller]

Some of the insulation and pex

[giantkiller]

Manifolds and pumps for heated floors that I made and installed. Six pumps for six sones infloor heat. 3 for 3 shop zones 3 for 3 zones living space upstairs. The 3 pumps lower are for  chilled water fan coils. For cooling. 2 upstairs 1 down. But as long as I keep the 3 r18 insulated overhead doors closed have never needed the one in the shop.

[giantkiller]

Picture didn't seem to post for last one

[giantkiller]

Cool picture of them pouring concrete on the third morning. Took 11 truck loads.
I laid down all the styrofoam. Then rebar mesh (because the staples were on backorder) and ziptied (almost 2000 zipties) 8000FT of pex in place in 2 days. Because that's all the time I had. Between them laying the gravel and putting in the forms. And when they were starting the pour.

[FJ1200W]

Seems to me the real issue here is that 71' Triple is interrupting the circulation of the heat flow. 2-strokes will do that....   If you'd like, I can swing by and toss that smokey old H1 in my truck and get it outta there for ya?  After that I bet its toasty...  Also, counts as "downsizing". 

I'm always open to offers, that old H1 was a basket case. No title, lost decades ago.

The gentleman I bought it from stored it for decades. It looks like someone wrecked it on the right side, and that was the end of it. Oddly enough, I actually have an extra case for the engine. It's cleaning up nicely, the market is pretty soft, I'd let it go.