Parting out an 88

[woodcreekpete]

Due to a rather substantial pair of holes in the crankcase, this decent FJ is being parted out. Plastics look decent but have had their share of repairs. Carbs were ultrasoniced this spring, forks have new seals, tank's good, scoops are very nice. Everything was in good working order until the 220km per hour dismemberment.
 If you see anything that interests you, let me know and I'll send some pics and an honest evaluation of the parts

[woodcreekpete]

 Bike has been reduced to a sizeable heap of parts now.
Here's what's good and what I figure it's worth.

Tank - clean inside, no dents, couple of tiny chips up by the filler   $135
Fork legs - clean, no rust, semi-polished (not Conlon quality, but a little shiny), new seals last year   $145
Clutch master and slave - no leaks, new seals last year  $45
Inner windshield panels - up at the top of the fairing $30
Mirrors  $50 for the pair
Handlebar electric controls clean, no wear on the printing   $20 per side
Brake master  $25
Ignition pickup coil and rotor  $25
Choke cable and knob  $10
Carb boots - soft, no cracks   $50 for the set
Carbs - cleaned this spring, 115 mains, 42.5 pilots, RPM stainless kit   $160
Clutch - complete, hub, plates steels, missing the retaining wire   $40
Mufflers - decent, no dents, 6 out of 10  $70
Alternator  $40
Starter  $30
Uni pods - clean   $30
Lock set - all 3   $35
Gauge surround - nothing broken   $65
Inner fairing panels - left has been repaired, looks good  $30   right is good   $30
Side covers and filler panels - nice shape, all tabs good, foam's doing the usual   $30 per side
Tail - no cracks/ broken corners, decal is faded   $20
Front discs  - 3 sets of them, all within legal specs  $50 per pair
Fairing side trims  - good shape, no rash    $35 for the pair
Suspension relay arm - all the bearings are good  $30
Fuel pump - $35  I have a couple of others with varying size inlets/outlets but have reducers and elbows to make them work  $25 each
Windshield - decent, tiny crack at upper right mounting hole   $35

If any of this stuff interests you, let me know and I'll take pics of whatever.

US $ for these gems of Japanese engineering

Shipping is whatever Canada Post quotes - I'll send a pic of the receipt for peace of mind.

Thanks ---   shop away people!

  Pete

[woodcreekpete]

More Choice Swag

Transmission gears, shift forks, drum   $60
Wiring harness, all the relays, fuses etc.   Canadian model - should be the same as US. Great condition, every terminal has been liberally dosed with dielectric grease for at least 12 years - nothing burnt  $60
R1 - YZF750 masters with mounting brackets for a 6mm threaded hole in the clipons  $40
Starter drive   $30
Tailight wired with internal LEDs and using the brake light as a signal   $40
86 front signals  - 2 sets  $30 per pair


Anything in the picture is free - you pay the shipping, I'll pack and mail it.

It's either you or the dump!


  Pete

[giantkiller]

Hey  Pete I PMd you about a few parts  just wondering if you got them.

[Ted Schefelbein]

Yea, me too.

Ted

[woodcreekpete]

Seems to be a communications gap here. It'll work better if messages are sent from your personal email to me at:       sleaner@hotmail.com

[woodcreekpete]

Texasdave:  send a message thru your personal email to me at    sleaner@hotmail.com

[woodcreekpete]

Tank, inner w/shield panels, scoop trims, one pair of discs, side plates, footpegs, motor mounts - all gone to new homes!

[giantkiller]

Thanks for taking the time to make the parts available.
The  tracking on the package just says processed through Montreal facility on December 16. In transit.  Hasn't changed since the 16th. Does it usually take this long?

[woodcreekpete]

Thanks for taking the time to make the parts available.
The  tracking on the package just says processed through Montreal facility on December 16. In transit.  Hasn't changed since the 16th. Does it usually take this long?

Hello Dan:   I'd have thought it would be there by now too. Usually takes 7-10 business days but with this Covid thing where everybody's shopping on line and it being Christmas, they're running slow.
  Sooner or later though.
Pete

[RPM - Robert]

 It is, "The new normal."

My wife ordered some Christmas items from the UK at the beginning of November. They are still sitting in Los Angeles.
While it is much better now, during the first few months of Covid, some of our international stuff was taking up to 3 months to get delivered. UPS, postal, FedEx, DHL all the same. Even now, one of our suppliers has a warehouse 50 miles away. Everything was, up until this year, next day. Now it is taking up to a week sometimes.

[giantkiller]

Tracking just updated. Arrived at. Metro NY facility at 6:13pm.
Yep new normal. Montreal to New York 13 days. Lol. Probably another week or 2 from NY to Wisconsin.

[giantkiller]

Hey Pete. I keep forgetting to tell you.  The tank and all the part's got here on the 1st.  Everything was packed up great and was in good shape. The tank is in great shape.  Thanks again.

[woodcreekpete]

Thought I'd offer up a package deal on the front end parts and the carbs.

. Forks (somewhat polished, year old seals, stainless allen drain and locating screws), 17x3" wheel (stripped and lip polished), discs (measured at 3.6mm), calipers (very good pads), axle, speedo drive and spacers. Everything needed to swap to CV era forks
$175US for everything. A rough guess on shipping is around $75 into most of the US.

Carbs - ready to install, boots and filters - $200US for all.  Shipping, around $50

[tdm34]

Hi Do you still have the footrest plate? if so how much to Akron, OH, 44313

Regards Rob