News:

           Enjoy your FJ


Main Menu

Optional Fork Oils - (Re-hash of an old posting)

Started by Scooterbob, April 29, 2010, 02:53:24 PM

Previous topic - Next topic

Scooterbob

Is this a viable option??? http://www.fjowners.com/index.php?topic=664.0   

It seems too good to be true, compared to the expensive "fork oils".  Sorry if I'm beating the dead horse.  :dash2:
Do not argue with an idiot. They will drag you down to their level and beat you with experience.


-----Bob G.-----

Travis398

Quote from: Scooterbob on April 29, 2010, 02:53:24 PM
Is this a viable option??? http://www.fjowners.com/index.php?topic=664.0   

It seems too good to be true, compared to the expensive "fork oils".  Sorry if I'm beating the dead horse.  :dash2:

i know my owners manual says SAE 10W30 type SE motor oil is the recommended oil (after yamaha fork oil)

so i would guess ATF would be okay, but is that really much cheaper than fork oil?


When all you have is a hammer, everything looks like a nail.

Scooterbob

Quart of Castrol ATF is about $4.00. Quart of Yamaha Fork Oil is $13.38. So at at 1/3 the price it's an option I'm considering. 
Do not argue with an idiot. They will drag you down to their level and beat you with experience.


-----Bob G.-----

Arnie

Be aware that there are 3 different viscosities of ATF.
Choose the one you want. 


Chrysler ATF+3 = 10W

Dextron 3/Mercon = 15W

Type F = 20W

Cheers,
Arnie

Scooterbob

Any significant downside to using one of these instead?
Do not argue with an idiot. They will drag you down to their level and beat you with experience.


-----Bob G.-----

turbocamino

Quote from: Scooterbob on April 29, 2010, 08:32:40 PM
Any significant downside to using one of these instead?
I just installed the chrysler ATF (10wt) along with my new springs....all seems well...ride quality is  normal....I like the fact that ATF has very good cleaning quality's and should keep whatever valves are in the forks clean and working smoothly...i did,at first,notice just a hint of a red haze on my tubes,just above the seals though....seems to have stopped after a few dozen miles. I would recommend it as an acceptable alternative.
89 FJ1200 saphire.blu owned 8-9 years.  By far the most satisfying of them all. Constant tinkering got me the best bike you could ever want.

oldktmdude

 My 1981 Honda Cb900f workshop manual lists ATF as an alternate oil to the recommended fork oil. If my memory serves me correctly, I used to run ATF in my 1980 Kawasaki Z1r as well. A couple years ago I rebuilt a set of forks for a mates Yamaha DT200 and the manual also listed ATF as an alternative. When you think about it, an auto transmission and power steering system has a lot of heat to deal with, so it should work well in a set of forks. Like Arnie said, be sure to pick the correct type of ATF the suit your needs.  Regards, Peter.
1985 FJ1100 x2 (1 sold)
2009 TDM 900
1980 Kawasaki Z1R Mk11 (sold and still regretting it)
1979 Kawasaki Z650 (sold)
1985 Suzuki GSXR 400 x2 (next project)
2001 KTM 520 exc (sold)
2004 GasGas Ec300
1981 Honda CB 900 F (sold)
1989 Kawasaki GPX 600 Adventure

Scooterbob

Looks to be like I'm going to go with an ATF-15W, since I'm a rather "large" guy.  Thanks for all the feedback.
Do not argue with an idiot. They will drag you down to their level and beat you with experience.


-----Bob G.-----