News:

           Enjoy your FJ


Main Menu

Ignition advancer ready

Started by Alf, May 25, 2017, 02:18:38 AM

Previous topic - Next topic

Alf

More than 10 years I have kept in my wardrobe this Factory ignition advancer, waiting for to be used in a FJ 1100 or in my "new" 1200 1TX

It is no more available from Factory, I think


pajo99

how much this advances ignition?

Alf


FJ1100mjk

Probably be able to wheelie in second and third gear, after installing it. Good for another 15 horsepower@10,500 RPM.  :rofl:
Platinum Zircon-encrusted Gold Member

Iron Balls #00002175
www.ironballs.com


Alf

Quote from: FJ1100mjk on July 15, 2017, 11:38:49 AM
Probably be able to wheelie in second and third gear, after installing it. Good for another 15 horsepower@10,500 RPM.  :rofl:

:rofl2: :rofl2:

But.... iots true that the middle power ooomph increase a lot, just where you use the engine

Pat Conlon

A popular mod in the '80's I've had one on my '84 for years.
Vance and Hines and Factory Pro both made these advanced rotors.
First thing I noticed was a slight ping on long up hill grades (with stock jetting)
#40 pilots and Shimmed needles made that go away.

She seemed to start quicker, but that could have been from the coil relay mod.
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Country Joe

1993 FJ 1200

FJ_Hooligan

I recall not feeling any noticeable difference when I installed my V&H rotor.
DavidR.

Country Joe

Quote from: FJ_Hooligan on July 15, 2017, 07:26:14 PM
I recall not feeling any noticeable difference when I installed my V&H rotor.

Was that on your 85 or your 93?
1993 FJ 1200

FJ_Hooligan

'85

I gave you all my '93 spare parts.  :-)
DavidR.

Bezmozek

Is there dyno from 3º/5º changed timing?
I am not into top end performace, but is there some noticeable gain in mid rev?
´85 FJ 1100

Alf

The gain is mainly at the midrange. In fact, increase the compression

Bezmozek

Thx Alf,
you do have oil temp gauge?
Is there a big difference in temperature with ignition advancer?
´85 FJ 1100

Alf

I cant say if with the advancer the bike run hotter because my 3CV bike have fitted a bigger rad, and another improvements

And my 1TX is going to exit from the refurbish with a bigger rad too, so I cant get an specific verdict

Travelling side to side with a friend with another 3CV with oil temp gauge fitted too but with std cooler and with no mods, both bikes always were at similar operating temperatures

ribbert

Quote from: Bezmozek on July 21, 2017, 01:19:13 PM

Is there a big difference in temperature with ignition advancer?


5 deg advance will make no difference to running temps. Retarded ignition causes hot running.

IMO

Noel
"Tell a wise man something he doesn't know and he'll thank you, tell a fool something he doesn't know and he'll abuse you"