Carbs

[scapello]

This seems to be a pretty decent price.
http://store.600racing.com/site/product.cfm?id=204DB76E-B0D0-791A-656054E93F57C69B&dept_id=4CC0408A-B0D0-791A-65AEA69C4BF104C4

[racerrad8]

I don't think that price is current...They do not keep the online pricing up to date very well. That is cheaper than I bought them for late last year...

Either that, or they have determined the have too many and have lowered the price to get them off the shelf.

If that is the case, that is a good deal.

Randy - RPM

[VMS]

They havent updated their online catalog since 2006. The reason I was given was that the dealers were starving because everybody was ordering direct from North Carolina

[weymouth399]

A buddy of mine has 4 NIB late model carbs $375.00 including shipping to lower 48 would have to check rates to ship anywhere else
Bob

[weymouth399]

Three racks left at this price after these they will go back to $400.00 plus
if your going to keep your Fj awhile this is a great deal
thanks to all that have bought
Bob

[weymouth399]

Down to two sets left, NIB $375.00 shipped to lower 48 (this is a great deal don't miss out)
Thanks to all
Bob

[racerrad8]

This seems to be a pretty decent price.
http://store.600racing.com/site/product.cfm?id=204DB76E-B0D0-791A-656054E93F57C69B&dept_id=4CC0408A-B0D0-791A-65AEA69C4BF104C4

Looks like they updated the website and gotten the price updated. I know Bob (weymouth399) has been selling them for $375.00, but I don't know if he has anymore. I know he said when he ran out they would be $400.00+ back in an earlier post in April.

I can supply these carbs which can easily be converted for non-fuel pump application as well.

I would be happy to help,
                        Randy - RPM
                        randy@rpmracingca.com

http://www.fjowners.com/index.php?topic=69.0

[weymouth399]

Just found 2 more sets of carbs NIB. 
So three sets left at this price. $375.00
Thanks to all
Bob

[SlowOldGuy]

And here I thought I was the only one who had carbs and carb parts scattered all over my shop.

DavidR.

[weymouth399]

Two sets left at this price, don't miss out. 
After these back to normal price.   
Thanks Bob

[weymouth399]

Still have two set left.

Bob

[yamahammerFJ]

What's needed to fit these to a 1984-85 FJ?

[weymouth399]

A bunch of work
Randy or Old slow guy could tell better, drilling & filling fuel inlets, different needles seats. Maybe more?
Randy also sells carbs and I belive he has done this mod.

Bob

[racerrad8]

A bunch of work
Randy or Old slow guy could tell better, drilling & filling fuel inlets, different needles seats. Maybe more?
Randy also sells carbs and I belive he has done this mod.

Bob

Not much work really; pretty easy. You will need to break down your old set and remove the dual inlet fuel supply fittings. Then you will need to remove the two outer carb bodies from the new set and install the fittings you removed from the old set.

After that you need to change over the float needle seats over to the ones from your old carbs. The new needle will work with the old seat without any problem.

Bolt them on and you will be ready to go.

If you need me to set you up a new set I can do that if you want to send me your old ones.

Let me know, Randy -RPM

[yamahammerFJ]

Randy, I'm not really sure what shape my carbs are in. One mechanic a few years back told me it appeared someone had drilled out the jets but I never actually saw it for myself. He could have mistaken a worn needle seat for a crappy dremel job, but who knows? Bottom line, I think if I were to send these to you and have you set them up, you may find some necessary '85 bits that need replacing.