News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Carbs

Started by Cash Dereszynski, July 23, 2015, 05:43:40 PM

Previous topic - Next topic

Cash Dereszynski

hello
Back at it. Ordered emultion tubes, I hope this is it !

Cash
Fuck it,let's ride.

Pat Conlon

Make sure you get the right e tubes for your FJ1100 carbs.
The e tubes for the early carbs with the flat bottom slides are different than the e tubes used on the later FJ1200 carbs with the curved bottom slides.

Randy @ RPM knows this, all other shops (like Factory Pro) do not.  If you got the e tubes from Randy, you're gonna be ok.
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Cash Dereszynski

It didn't work. still nothing after idle.
I give up . Saving up for complete RPM carb set.

Cash
Fuck it,let's ride.

Pat Conlon

Before you buy a new set, first send your carb's to Randy and ask his opinion.
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Cash Dereszynski

Carbs are buggered by me and dynojet mods.
Fuck it,let's ride.

FJmonkey

Quote from: Cash Dereszynski on November 06, 2015, 02:46:55 PM
Carbs are buggered by me and dynojet mods.

Do you mean they are beyond repair? Or are you planning to send them to RPM for some carb Mojo? If you still need to ride it I can loan you my carbs off my '86. They are set too lean for open pipes but can get you by for a few weeks.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

Cash Dereszynski

The last attempt was to install main nozzle and pilot jets .Wrong main nozzles modified(butchered) pilot jets mangled then tried to extract with ez outs mangled more,completely
drilled out #2 carb pilot can't change the others too buggered to back them out. Reassembled as best I could:(   The bike starts and idles even to a RPM of about 3k on choke and at moments even higher. I'm convinced its a carb issue not electrical or coils. So ....(1) a used set of carbs , (2) a new set of carbs(RPM) ,(3) ship my carbs to RPM to undo the dynojet and my buggery , (4) New fuel injection complete from late model FJ , (5) part it out buy a Prius. 
What say you Forum ?

Cash

PS in escrow for a place in Palm Springs just off Hwy 74 besides all that other stuff!!!
Fuck it,let's ride.

FJmonkey

Send them to RPM and get a quote... Decide after the quote...
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

movenon

I would lay low for a good used set of carbs and rebuild. Problem is making sure that a used set from "flea bay" as an example is not buggered up. Shop carefully.  Contact Randy he might have a used set for sale or other options.  Perhaps if just one carb is buggered up you might get by with buying a single used carb from a parts set of carbs.  Step 1: call RPM.

Originally my bike was set up with "Dyno Junk" jets, needles and springs.  I converted them back to all Mikuni parts and have never looked back.
George
Life isn't about having the best, but about making the best of what you have...

1990 FJ 1200

FJmonkey

I might have some spare parts from my original '86 carbs....
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

Pat Conlon

If it's off Hwy 74 then that would not be in Palm Springs, but in Palm Desert, so welcome neighbor.
If you've never ridden a bike on Hwy 74 you're in for a treat. The road has a fresh overlay, smooth as silk.

Back to the carbs: Send them to Randy, see if he can save them. He has lots and lots of parts...lots.
Worse case: find a FleaBay set, then send those to Randy. Don't fuck up another set.
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

copper

what does the forum say, the same thing many including me told you back in April http://www.fjowners.com/index.php?topic=13579.msg137110#msg137110
congrats on the house

racerrad8

Quote from: copper on November 07, 2015, 07:13:23 PM
http://www.fjowners.com/index.php?topic=13579.msg137110#msg137110
Oh the memories, thanks for posting those up. I remember your disbelief about the dirt in the carbs when you sent them to me the second time; quite a difference from the stock filter to those K&N's. Glad you are happy with the RPM pod filters and I assure you they will not be that dirty the next time.

Then there is the link to Randy's (not a lib) carbs too...those were probably the worst set of carbs I have ever received and was able to resurrect.

Cash, if you want to send me what you have and we can see if they can be salvaged. Please send me the original e-tubes and all of the other original parts you might still have as well.

Randy - RPM
Randy - RPM

rktmanfj

Quote from: racerrad8 on November 07, 2015, 07:28:35 PM

Then there is the link to Randy's (not a lib) carbs too...those were probably the worst set of carbs I have ever received and was able to resurrect.


But hey, that was the way they were when I got 'em...  :pardon:

Randy T
Indy

Blessed be the LORD my strength, which teacheth my hands to war, and my fingers to fight.
Psalms 144:1

'89 FJ1200
'90 FJ1200
'78 XT500
'88 XT350


JPaganel

Quote from: Cash Dereszynski on November 07, 2015, 04:55:22 PM
(4) New fuel injection complete from late model FJ
Sadly, no such thing. FJ never got FI.

XJR eventually did, but you are in US, so no XJR anything for you. Plus, a complete XJR FI system wouldn't be particularly cheap.
1993 FJ1200 ABS

1984 FJ600, up on blocks

1986 FJ1200, flaming wreck, repaired and sold
1986 FJ1200, repaired, ridden, sold


I don't want a pickle
I just want to ride my motorcicle