News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Need help removing front forks!

Started by DaveA, December 29, 2009, 05:07:52 AM

Previous topic - Next topic

DaveA

Hi People,

To save myself some money, the garage suggested i just bring the forks in so they can replace the seals, sounded good to me!  Then i see the anti dive unit plumbed into my brake caliper!  Is there any way i can get the forks off as a unit, and have them re-fill them?  or will all fluid just escape when i remove it from the caliper, and if they replaced the seals, would i then have to fill the forks myself after re-fitting to the bike?

Cheers in advance

TRoy

Quote from: DaveA on December 29, 2009, 05:07:52 AM
i see the anti dive unit plumbed into my brake caliper!  Is there any way i can get the forks off as a unit,

Hi Dave, just take out the 2 small screws on the top (pointing skywards) , and the little plunger thing will pop right off. you won't lose any brake or fork fluid. If you take the front pointing screws and remove the lower half of the unit, you WILL lose fork fluid.

Kookaloo!
Peace & Love
86FJ 100K+
07Burg650
15Downtown300