SE Qld manshed day early 2015

stua1959 · January 23, 2015, 08:55:49 PM

REMINDER - SE QLD MANSHED DAY NEXT SATURDAY 31 JAN

Make it after 9 AM as I need to vote and pick up Ray's sausages

Bones · January 23, 2015, 09:01:19 PM

Havent forgotton Stu, looking foward to it

X-Ray · January 24, 2015, 03:19:34 AM

You are too kind Stu

We are not voting next Saturday, decided to avoid the lines etc and get in early with a postal vote, woohoo!

ken65 · January 24, 2015, 04:22:14 PM

I voted a few days ago aswell, saves mucking around. Just for your info stua. There's an early polling booth
right near ekke's workshop.

ken65 · January 27, 2015, 05:25:31 PM

anybody from south want to meet at the usual spot at the servo around 8am or so??

Bones · January 28, 2015, 01:11:53 AM

Seeing as Stu doesn't want us there until after nine Ken, I can meet you at the servo about 8.30 - 8.45 am.

X-Ray · January 28, 2015, 02:13:54 AM

Cheale and I will be leaving my place around 8.30. we wouldn't get to the BPs till around 9 or just after, but if you're happy to wait we'll see you there. I have to get some DOT 4, going to flush front and rear brakes, the fronts are especially spongy,

Bones · January 28, 2015, 03:54:25 AM

No probs Ray.

stua1959 · January 28, 2015, 04:55:10 AM

Bring your swimmers if u want to cool down in the pool

ken65 · January 28, 2015, 04:59:53 AM

i will meet you's at the servo, cant see why we cant wait for everyone..

hey stua, is it alright if i wear shorts in the pool, i cant find my budgie smugglers.

in fact i haven't seen them in years, just like the thing there suppose to smuggle . hehe.

X-Ray · January 30, 2015, 04:09:25 AM

Hey Stu, Bender (Stephen) contacted me this arvo to see if there is space for him to come on Sat as well, I said should be no probs. He has the early FJ1100 and wants to change fork fluid. Do the early FJ1100s have that inner socket cap setup? I can't remember, but if anyone has the tool for the job Stephen would appreciate you bringing it.

Giving the bike a clean this arvo, go to take the belly pan off and I think, when the hell did I smash into the road to cause this damage??

Then I felt around the clutch slave.

Was only thinking a few weeks back it might be time to change the seals, looks like I left it too long. Ok, another job for tomorrow, bleed brakes and put in new slave kit. DAMMIT!!!!!!! Not sure how this belly pan is going to be repaired.

ribbert · January 30, 2015, 04:20:56 AM

Quote from: X-Ray on January 30, 2015, 04:09:25 AM
Hey Stu, Bender (Stephen) contacted me this arvo to see if there is space for him to come on Sat as well, I said should be no probs. He has the early FJ1100 and wants to change fork fluid. Do the early FJ1100s have that inner socket cap setup? I can't remember, but if anyone has the tool for the job Stephen would appreciate you bringing it.

Giving the bike a clean this arvo, go to take the belly pan off and I think, when the hell did I smash into the road to cause this damage??

Then I felt around the clutch slave. Was only thinking a few weeks back it might be time to change the seals, looks like I left it too long. Ok, another job for tomorrow, bleed brakes and put in new slave kit. DAMMIT!!!!!!! Not sure how this belly pan is going to be repaired.

Ray, if you washed your bike occasionally and kept it clean, you would have noticed the leak.

Noel

X-Ray · January 30, 2015, 04:48:47 AM

I know Noel, I have been slack,

Tell you what, this is a good reason for changing the fluids over to a DOT 5 base, it does not attack paint/plastics. I will do this one day, probably when I order a complete new clutch slave and fit it.

ken65 · January 30, 2015, 05:24:03 AM

thats no good ray, probably a few f words thrown in.

is the fork thing that steves chasing the big hex (26mm from memory)thing that you open up the top of the forks with??

i will bring mine just in case it is. see you all tomorrow.

X-Ray · January 30, 2015, 05:36:56 AM

I think the early FJs used an internal hex nut Ken, I'll have to look it up.

News:

SE Qld manshed day early 2015