SE Qld manshed day early 2015

[stua1959]

Ken, I will pay my rental fee in chicken wings - all u can eat

[Bones]

Basic tools at my place, check with me if you need any special tools.
I have a compressor but no rattle gun

Rattle Gun!!! I've got 3 of them. I can bring a kit up if anyone needs one.

[ken65]

Ken, I will pay my rental fee in chicken wings - all u can eat

really!! thanks stua, cant wait. chicken wings as far as i'm concerned are the best bit.


how'd you go with the valves? 

ken

[stua1959]

Good thanks Ken, used all the 2.75 's so I bought a couple of replacements. Now just waiting on some o rings for the pilot screws. I accidentally blew them into orbit with compressed air when I was cleaning the carbs. One of them was pretty chewed up which might explain the popping at idle. Your mate at Sandgate is not back at work yet so I still have the rear shock to sort out

[stua1959]

Basic tools at my place, check with me if you need any special tools.
I have a compressor but no rattle gun

Rattle Gun!!! I've got 3 of them. I can bring a kit up if anyone needs one.

I could use one to get the nut off the ignition so I can do the timing mod. I have also buggered the screws holding the plate. It might be a good idea not to let me near your bikes, I seem to be doing more breaking than fixing. i will just stick to cooking snags

[ken65]

excellent, so all your valves are sweet?  i used up all my 2.80 with my adjustments.    its a good feeling not having to worry
whats happening under the tappet cover....  if  you can get the o ring size your chasing theres a bloke at  brendale who will have them...
he has millions of them,  probably 20 hundred million ..

[Bones]

No worries Stu, I'll even bring up my little bracket to hold the rotor while retightening the bolt. It got a good workout doing timing mods at the Generals Manshed day.

[stua1959]

excellent, so all your valves are sweet?  i used up all my 2.80 with my adjustments.    its a good feeling not having to worry
whats happening under the tappet cover....  if  you can get the o ring size your chasing theres a bloke at  brendale who will have them...
he has millions of them,  probably 20 hundred million ..

Thats a lot of million

[X-Ray]

Now just waiting on some o rings for the pilot screws. I accidentally blew them into orbit with compressed air when I was cleaning the carbs. One of them was pretty chewed up which might explain the popping at idle.

I'll have to check out how you did your carbs Stu, I still haven't put anything up on the ones I've started on the Project FJ, but I've decided to put new kits in all 4. Only around $31.00 each kit with everything needed from Motorcycle Spares Warehouse in Vic. The jets and all are pretty gummed up, easily cleaned but the emulsion tubes are just a basket case, plus I stuffed a couple of bowl gaskets. What the heck, if I'm going to rebuild this bike properly, I'll have to spend the money.....   

[The General]

excellent, so all your valves are sweet?  i used up all my 2.80 with my adjustments.    its a good feeling not having to worry
whats happening under the tappet cover....  if  you can get the o ring size your chasing theres a bloke at  brendale who will have them...
he has millions of them,  probably 20 hundred million ..

Thats a lot of million

Not if you`re a politician!...Speaking of which, I always vote days before the set date, at the same place where all the local sheep go on the official voting date. A number of voting sites open days, earlier for absentee votes. (Don`t matter if ya not really going to be absent). While I`m there I`ll knock off some placards & brochures on how ta really vote if ya need some!
....mmmmm, might wear my burqa under the helmet so nobody can recognise me.   

[oz.fj]

i think they open at 8am, i might go and do it midweek i think.

hey darran, as its a manshed day i will forgo my usual $30 rental on the tool and kit.

Very good old chap !
You are to kind 

[oz.fj]

No worries Stu, I'll even bring up my little bracket to hold the rotor while retightening the bolt. It got a good workout doing timing mods at the Generals Manshed day.

Hope your in training......
I want to do 007 too.

[Bones]

No worries Stu, I'll even bring up my little bracket to hold the rotor while retightening the bolt. It got a good workout doing timing mods at the Generals Manshed day.

Hope your in training......
I want to do 007 too.

What's 007 Darran, ?? you turned into James Bond or something.

[oz.fj]

No worries Stu, I'll even bring up my little bracket to hold the rotor while retightening the bolt. It got a good workout doing timing mods at the Generals Manshed day.

Hope your in training......
I want to do 007 too.

What's 007 Darran, ?? you turned into James Bond or something.

007 is the plate on my red , white and silver... We like to call him James.

[stua1959]

My address is 42 Bradman St Caboolture. Take the King St, Caboolture exit off Bruce Highway - not the Kilcoy exit

https://www.google.com.au/maps/place/42+Bradman+St,+Caboolture+QLD+4510/@-27.0811574,152.9622644,16z/data=!4m2!3m1!1s0x6b93f3b0d2331f85:0xacdec0cf501f26f1