News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Carb jetting

Started by Ront, January 26, 2014, 01:37:25 PM

Previous topic - Next topic

Ront

Does anyone know if stock carb jetting on a 86 FJ1200 with an older Vance and Hines 4into1 is Ok?

FJ1100mjk

Quote from: Ront on January 26, 2014, 01:37:25 PM
Does anyone know if stock carb jetting on a 86 FJ1200 with an older Vance and Hines 4into1 is Ok?

See Section 3.11 on this FJ FAQ website. It mentions Yoshimura exhaust, but I think it will be a good reference for your needs.

http://www.reocities.com/MotorCity/Downs/1039/fjfaq_16.html#toc

You don't mention if you have the stock airbox or the individual pods, but there's information for both.

Jetting is subject to a lot of variables, and I am certain that those on this forum with more background and knowledge regarding this, will offer more assistance.

Marty
Platinum Zircon-encrusted Gold Member

Iron Balls #00002175
www.ironballs.com


FJmonkey

If you are keeping the stock exhaust then not likely. Jetting is required when you allow more air to flow. That means both better intake and exhaust. Which also means you don't get much performance improvements until both are opened up....
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

Pat Conlon

Quote from: FJmonkey on January 26, 2014, 03:52:17 PM
If you are keeping the stock exhaust then not likely. Jetting is required when you allow more air to flow. That means both better intake and exhaust. Which also means you don't get much performance improvements until both are opened up....

I suspect what Mark meant to say was if you are keeping your *stock airbox* then not likely....
You already stated that you have the V&H exhaust.
We have to forgive the Monkey, he is currently in a 3rd world country and has been eating too many gorditas.
No telling what is in the mystery meat they use there....parasitic worms can affect the cognitive functions.

Back to jets....if you wanted to bump up a size to 115's no big deal. The oem pilot jets on the USA bikes were on the lean side at 37.5.... Cooler low speed running can be had with 40's.. HTH  Pat
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

FJmonkey

Quote from: Pat Conlon on January 26, 2014, 04:07:33 PM
Quote from: FJmonkey on January 26, 2014, 03:52:17 PM
If you are keeping the stock exhaust then not likely. Jetting is required when you allow more air to flow. That means both better intake and exhaust. Which also means you don't get much performance improvements until both are opened up....

I suspect what Mark meant to say was if you are keeping your *stock airbox* then not likely....
You already stated that you have the V&H exhaust.
We have to forgive the Monkey, he is currently in a 3rd world country and has been eating too many gorditas.
No telling what is in the mystery meat they use there....parasitic worms can affect the cognitive functions.

Back to jets....if you wanted to bump up a size to 115's no big deal. The oem pilot jets on the USA bikes were on the lean side at 37.5.... Cooler low speed running can be had with 40's.. HTH  Pat

Bugger!! The gorditas  are not to blame, but Pat was right in correcting me. Maybe it was the tequila, michaladas, or the bull fighting...
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

FJ_Hooligan

Needles, needles, needles ...
DavidR.