News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

my fj1100 (now FJ1200) motor

Started by ccsct203, September 26, 2009, 09:32:02 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ccsct203

September 26, 2009, 09:32:02 PM
FJ1200 head, cylinder with Wiseco 10 1/2 to 1 pistons
Megacycle cams
shim under bucket w/ titanium retainers
Mikuni rs 36mm
Much more


If it's not broken, fix it anyways

thuber3040

#1
September 26, 2009, 10:12:50 PM
Nice.  :good2:

What size did you go with on wiseco?
Keep us posted on how it runs!!
1985 FJ1100 Finally Home
1984 FJ1100 New purchase
1978 KZ1327
1973 H2

higbonzo

#2
September 26, 2009, 10:18:39 PM
Very nice.  Should be a runner.... :good2:

ccsct203

#3
September 27, 2009, 06:44:21 AM
I stayed with the standard 1188cc or "1200cc"
runs well with the setup i have
I may have to change my final drive
I'm running 18 and 38 sprockets
I'll report more soon
just finishing the carb tuning
If it's not broken, fix it anyways

Sturgis_Bryan

#4
September 29, 2009, 10:15:30 AM
Keep us updated on the carbs, I have a set that need to be installed.

ccsct203

#5
September 29, 2009, 05:33:43 PM
will do.
I found in stock format with only a 4-1 V&H and a dyna 2000 and coils the 130 mains were to rich
I went with the 117.5 mains and at #3 on the needles

If it's not broken, fix it anyways
Print
Go Up Pages1
User actions