News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Japanese FJ

Started by oldandgrey, May 12, 2012, 05:30:42 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

oldandgrey

May 12, 2012, 05:30:42 PM
Hello all. Can anyone tell me if an 1987 Japanese FJ1200 would differ from a North American bike? Thanks

FJmonkey

#1
May 12, 2012, 06:39:49 PM
Quote from: oldandgrey on May 12, 2012, 05:30:42 PM
Hello all. Can anyone tell me if an 1987 Japanese FJ1200 would differ from a North American bike? Thanks
Detuned to reduce HP, smaller intake boots, maybe other limiters....
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

Harvy

#2
May 12, 2012, 07:22:42 PM
Quote from: oldandgrey on May 12, 2012, 05:30:42 PM
Hello all. Can anyone tell me if an 1987 Japanese FJ1200 would differ from a North American bike? Thanks

If my '91 Japanese model is anything to go by, you will have 28mm intake manifolds between the carbs and head.....32mm for other markets.
You will have an ignition cut out device on the back of the speedo - mine operated at 180kph (the speedo only reads to 180kph also).
No side reflectors on the forks.
Reflector attached to a metal tab which is pop-riveted to the rear mudguard.
Thats all i can think of at the moment.

Cheers
Harvy

FJZ1 1200 - It'll do me just fine.
Timing has much to do with the success of a rain dance.
Print
Go Up Pages1
User actions