Swing arm spools

[1tinindian]

Can these be put on a stock FJ swing arm?
Anyone have pictures of it done for use with a rear lift stand?

Leon

[Arnie]

Sure.  I've been thinking of doing this to my '91 but haven't got round to it yet.
If your swingarm is hollow like mine, I'd put a solid spacer inside the swingarm for strength and to keep from collapsing the arm.
Since I haven't done it yet, I have no pictures either.

Cheers,
Arnie

[1tinindian]

I thought of welding a nut to the bottom of each side of the swing arm to tread a spool into.
Should look fine with it all installed.

Leon

[JCainFJ]

Leon,

Yes,I make spool mounts that attach to both steel and alloy FJ swingarms.
This link shows Bpros YZF with my spool mounts.

http://www.oldskoolyzf.com/forum/viewtopic.php?f=9&t=14

This link shows my YZF with the spool mounts. I've used them for 8 years, with no problems. They attach to the arm  by drilling 2 or 3 1/4in holes for 6mm bolts. They take spools that mount with 8mm bolts.

http://www.oldskoolyzf.com/forum/viewtopic.php?f=9&t=16

Ride Well,
Jon


Can these be put on a stock FJ swing arm?
Anyone have pictures of it done for use with a rear lift stand?

Leon