News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

1984 FJ1100 Part-Out

Started by derbybrit1, February 21, 2024, 12:37:08 AM

Previous topic - Next topic

derbybrit1

Parting out a 1984 FJ1100 rolling chassis with 9000 miles.  No engine.  I am only posting photos of the stuff that I think you guys might be interested in.  There are other miscellaneous parts not shown, so just ask. 

Please review the photos and post a message for any part you are interested in.
Front fairing and instruments/headlight are available together or separately.  Package deals for bodywork or any combo of parts.
Local pickup in San Dimas, CA, or shipping at my cost/your expense. 

Billet Superbike fork brace FJ11/FJ10 $35
Front fairing subframe  straight      $30
Grab Rail                             $20
Footpegs front and passenger          $30
IC Igniter Box with vacuum line       $50
Taillight                             $20
Mufflers no rash/little surface rust  $45
Rear subframe                         $30
Handlebars                            $40
Carb insulators                       $35
Carb set 1                            $100
Carb set 2                            $100
Generator - clean have several        $35
Oil cooler and lines have 2           $35
Wheels pair                           $50
Front rotors pair - good 9K miles     $60
Rear rotor good                       $20
Dyna Coils and HD Wires               $60
Tail Section nice                     $60
Belly Pan 1 crack fixable             $60
Trim pieces                           $20
Tank clean no dents with cap/key      $175
Scoops                                $30
Front Fender 2-piece nice no cracks   $60
Side covers nice                      $60
Instruments  9000 miles               $150
Front Fairing w/ windscreen& trim     $125
Headlight assembly                    $30



giantkiller

Sent you a pm about the fairing, bellypan and scoops. If there is anyone from the middle of the country that is going to California. And could bring them back. I could meet you at your house and pick them up... would be greatly appreciated. I'm not in a hurry to get them. I'm sure that shipping to Wisconsin isn't going to be cheap but. I'm more worried that they will get damaged.
86 fj1350r
86 fj1380t turbo drag toy (soon)
87 fj1200 865 miles crashed for parts
89 fj1200 touring 2up
87 fzr1000 crashed
87 fzr750r Human Race teams world endurance champion
93 fzr600 Vance n hines ltd for sale
Custom chopper I built
Mini chopper I built for my daughter just like the big 1

FFGO


fj1289

Marc - I'm interested in the tank, rear subframe, tail piece and taillight.  And a generator for good measure!  Assuming all are still available...
Chris

derbybrit1

Preliminary -
FJ1289 has dibs on tank, rear subframe, tail section, tail light, and generator
FFGO has dibs on the front fender and maybe forks
GiantKiller has dibs on the fairing, bellypan, and scoops.

derbybrit1

FFGO has dibs on the front fender and fork brace.

Millietant

Hey Marc, do you still have the FJ with the YZF 1000 Thunderace rear wheel/anrm etc and YZF 750 front end?

That bike was the inspiration that got me modifying mine  :good2:
Dean

'89 FJ 1200 3CV - owned from new.
'89 FJ 1200 3CV - no engine, tank, seat....parts bike for the future.
'88 FJ 1200 3CV - complete runner 2024 resto project
'88 FJ 1200 3CV - became a race bike, no longer with us.
'86 FJ 1200 1TX - sold to my boss to finance the '89 3CV I still own.

derbybrit1

Quote from: Millietant on February 28, 2024, 09:35:15 PMHey Marc, do you still have the FJ with the YZF 1000 Thunderace rear wheel/anrm etc and YZF 750 front end?

That bike was the inspiration that got me modifying mine  :good2:

The engine and carbs reached a point where I would have had to dump a bunch of money into it, so I parted it out.  Klavdy bought the front and rear suspension.  IIRC, he was on a California ride and had an argument with a pine cone and lost.  So another forum member (Frank Burkeen?) bought those same parts off Klavdy and a bunch of leftovers from me.  Not sure if Frank got the Akrapovic XJR1300 pipe or not.  I sure miss the old girl. 

Flynt

Quote from: derbybrit1 on March 01, 2024, 03:31:24 PM
Quote from: Millietant on February 28, 2024, 09:35:15 PMHey Marc, do you still have the FJ with the YZF 1000 Thunderace rear wheel/anrm etc and YZF 750 front end?

That bike was the inspiration that got me modifying mine  :good2:
Not sure if Frank got the Akrapovic XJR1300 pipe or not.

I did get the Akrapovic...  then with RPM's help built a 1350cc monster for it, installed Keihen FCR39s, and dyno tuned to ~165Hp at the wheel.  Also upgraded to custom Speedhut dash and some other, smaller changes.  Still loving it many years later...

Frank

PS - There's a build thread on here somewhere for "Wizard"...  that's my baby's name.  Thread was called "Removed her heart" I think.

There's plenty of time for sleep in the grave...

Millietant

Quote from: derbybrit1 on March 01, 2024, 03:31:24 PM
Quote from: Millietant on February 28, 2024, 09:35:15 PMHey Marc, do you still have the FJ with the YZF 1000 Thunderace rear wheel/anrm etc and YZF 750 front end?

That bike was the inspiration that got me modifying mine  :good2:

The engine and carbs reached a point where I would have had to dump a bunch of money into it, so I parted it out.  Klavdy bought the front and rear suspension.  IIRC, he was on a California ride and had an argument with a pine cone and lost.  So another forum member (Frank Burkeen?) bought those same parts off Klavdy and a bunch of leftovers from me.  Not sure if Frank got the Akrapovic XJR1300 pipe or not.  I sure miss the old girl. 


I'm glad it all went to good homes and Franks bike sounds great.

I remember now we communicated on the AF1 Aprilia owners forum - I figured you might be a British ex-pat from the city of Derby - didn't realise your forum ID was to do with dogs   :sarcastic:
Dean

'89 FJ 1200 3CV - owned from new.
'89 FJ 1200 3CV - no engine, tank, seat....parts bike for the future.
'88 FJ 1200 3CV - complete runner 2024 resto project
'88 FJ 1200 3CV - became a race bike, no longer with us.
'86 FJ 1200 1TX - sold to my boss to finance the '89 3CV I still own.

derbybrit1

Fairing, Bellypan, and Scoops are being held for GiantKiller.  If I have not heard from him anybody else candeclare dibs.  Next stop is eBay.