News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Can this sparkplug wire be used??

Started by Old Rider, September 28, 2021, 01:27:48 PM

Previous topic - Next topic

Old Rider

Today i bought some cheap sparkplug wires since one of them is suspect .But the question is is this wire usable??? It does not have the same core and the shop had no idea if i could use it

Pat Conlon

Yes, stranded copper core wire can be used with resistor plug caps. (Like oem FJ caps)

Or...

Carbon core resistor plug wire can be used with straight plug caps.

Although...Not sure what diameter wire you have there.

IMHO the oem FJ stainless steel stranded core plug wire is damn near indestructible.
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Old Rider

Quote from: Pat Conlon on September 28, 2021, 02:04:46 PM
Yes, stranded copper core wire can be used with resistor plug caps. (Like oem FJ caps)

Or...

Carbon core resistor plug wire can be used with straight plug caps.

Although...Not sure what diameter wire you have there.

IMHO the oem FJ stainless steel stranded core plug wire is damn near indestructible.

Thanks Pat i measured the core and it is around 1.85mm. I'm unsure what material the red and white stuff is made of if it is plastic or silicone will do a heat test.The NR1 cable on my bike has
some serious wear marks from the airscoop duct hammering it.

Pat Conlon

I was referring to the outside diameter so it can fit in the resistor cap.
Going by memory, 10mm plug wire is too fat....8mm wire will fit.
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Old Rider

It is 7,1 mm  i will check how it fits in the cap

Pat Conlon

1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3