News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Fork inner tubes

Started by aj52, November 22, 2018, 11:04:32 AM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

RPM - Robert

#15
November 27, 2018, 06:00:47 PM
Yes, the mounting point is different to accommodate the ABS sensor. However the OD is still 300mm and the spacing is correct for the forks. You will need ABS rotors to use the ABS wheel but the caliper mounting brackets are the same for all of the non anti dive FJ forks.

aj52

#16
November 27, 2018, 06:07:49 PM
The wheel is complete with all the necessary parts and spacers.
Those measurements that Randy gave, is that for the inner tubes?

Hannes
Current:                              
1991 FJ 1200 ABS
1991 FJ 1200

RPM - Robert

#17
November 28, 2018, 10:21:47 AM
That is correct. Those are the length measurements by year for the fork tubes.
Print
Go Up Pages 1 2
User actions