Ii gotta chug now?

[Shane4371]

Installed pilot jet 40,finally lifted my needle jet,now i gotta chug.surg at low speed not horri le but its thier,any ideas?

[FJmonkey]

You changed two things, larger pilot jets and raised the needles. I doubt its the #40 jets and the needles are easy to put back where they were without removing the carbs. When trouble shooting, it is good to make only one change at a time. So try the needles back where they were and see if the "chug.surg" is affected.

[fj1289]

I think you'll also need to adjust the idle mixture for the new pilots -- do that first since it will overlap with the other adjustment you are making

[Pat Conlon]

yep, it's fat.

[Shane4371]

Very fat,can't I run them in.I'm at 3 turns out,

[jscgdunn]

Yes try turning them in at 1/2 turn incrments

[Shane4371]

Will do,thanks

[Shane4371]

I went 1/2 turn on each carb,rode it,no chug,then I went another 1/2 turn pinging on hard acceleration.going back 1/4 turn see what happens