News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Liquid Electrical Tape

Started by FJmonkey, October 21, 2015, 10:09:58 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

FJmonkey

October 21, 2015, 10:09:58 PM
I found one more good use for Liquid Electrical tape. If you have not lost the little boot for the reset knob, then fix it...

The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

movenon

#1
October 21, 2015, 11:23:19 PM
Nice little mod to help keep that boot attached and probably a better seal.  :good2:    A little glue on the knob threads helps.

I replaced my boot a few years ago (lost the knob and boot) using a Harley part no..  For those that need a new boot I think RPM has them, also here is a link with more info on the Harley part. http://www.fjowners.com/index.php?topic=6930.msg62127#msg62127.
George
Life isn't about having the best, but about making the best of what you have...

1990 FJ 1200
Print
Go Up Pages1
User actions