News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

carb synch screw springs

Started by squidley63, May 09, 2014, 12:59:35 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

squidley63

May 09, 2014, 12:59:35 PM
I've been fiddling with my carbs on my fj and have had issues getting it running smoothly. I took the carbs apart just to double check and on reassembly I noticed that one of the springs between the throttle tangs was different than the others. I would assume that the previous owner lost a spring and just found one close at a hardware store. It seems to be weaker than the stock springs but does seem to work. Just want a second opinion on whether I should run down a stock spring for it.

racerrad8

#1
May 10, 2014, 12:13:17 AM
Yes you should get a stock spring. That is what keeps Tue carbs properly sync'd

Randy - RPM
Randy - RPM
Print
Go Up Pages1
User actions