News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Bolt dimensions

Started by WhiteBeard, June 24, 2013, 01:41:31 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

WhiteBeard

June 24, 2013, 01:41:31 PM
Does somebody here know the dimensions of bolt no. 28 below?



The PO changed these into low grade bolts...  :negative:
Too easily stripped... don't ask me how I know.

Is the correct bolt dimension 5.0 mm in diameter and 50 mm length?

Thanks once again,
Nat

fj11.5

#1
June 24, 2013, 05:18:47 PM
Ill get back to you,  unless someone else gets here first
unless you ride bikes, I mean really ride bikes, then you just won't get it

84 Fj1100  effie , with mods
( 88 ) Fj 1200  fairly standard , + blue spots
84 Fj1100 absolutely stock standard, now more stock , fitted with Fj12 twin system , no rusted headers for this felicity jayne

FJ_Hooligan

#2
June 24, 2013, 05:30:44 PM
Part number is:  95811-06045-00

Which means the bolt is an M6 x 45mm length

Hooligan
DavidR.

fj11.5

#3
June 24, 2013, 05:37:21 PM
Quote from: fj11.5 on June 24, 2013, 05:18:47 PM
Ill get back to you,  unless someone else gets here first
shaft length 44.8mm.    thread width 5.8mm.     shoulder width 5.1.  Shoulder length 23.9mm.  10mm hex head.  10mm nut
unless you ride bikes, I mean really ride bikes, then you just won't get it

84 Fj1100  effie , with mods
( 88 ) Fj 1200  fairly standard , + blue spots
84 Fj1100 absolutely stock standard, now more stock , fitted with Fj12 twin system , no rusted headers for this felicity jayne

WhiteBeard

#4
June 24, 2013, 05:38:33 PM
Wow, thanks. You guys are the best.

And I will learn how to read those part numbers.

THANK YOU!

Nat

fj11.5

#5
June 24, 2013, 05:42:02 PM
No worries mate, ill go put this bolt back in the spare arm now  :biggrin:
unless you ride bikes, I mean really ride bikes, then you just won't get it

84 Fj1100  effie , with mods
( 88 ) Fj 1200  fairly standard , + blue spots
84 Fj1100 absolutely stock standard, now more stock , fitted with Fj12 twin system , no rusted headers for this felicity jayne

Tiger

#6
June 24, 2013, 08:01:31 PM
 :hi: Metric hex head cap screws (bolts) come in two basic grades: 8.8 and 10.9...8.8 is the lesser grade at 116,000 psi tensile strength and 10.9 a higher grade at 150,000 psi tensile strength...different manufacturers will differ to some degree... :good: Guess what, among other things, I sell for a living :lol: :rofl: :rofl2:... :biggrin:

John.
Life should not be a journey to the grave with the intention of arriving safely, in an attractive & well preserved body...but rather to slide in sideways, body completely worn out and and with your last dying breath screaming, "HOOOYA LIFE, lets try that again"!!!

fj11.5

#7
June 25, 2013, 03:51:52 PM
This little bolt had a cute number 8 stamped on the top  :biggrin:
unless you ride bikes, I mean really ride bikes, then you just won't get it

84 Fj1100  effie , with mods
( 88 ) Fj 1200  fairly standard , + blue spots
84 Fj1100 absolutely stock standard, now more stock , fitted with Fj12 twin system , no rusted headers for this felicity jayne
Print
Go Up Pages1
User actions