Home Depot Bracket...

[jscgdunn]

Hi Randy,
It would be great if you stocked/included the correct riv nut as well. 

On both of our '92's these have failed.   My fix is to use a prong nut (flatten the prongs) like this:

http://www.screwfix.com/p/4-pronged-tee-nut-m6-x-9-pack-of-10/79359

that fits in the hole in the backside of the frame.  Works but the threads just reach, in fact I take the rubber damper wahser off so it will.

Jeff

[Brad]

It has a nice bubble head for those who want to polish as well.
Randy - RPM

Great, one more knob to polish, can't you polish my knob for me??

I would think that would cost extra..  

ha, that just depends on who you are talking about..... speaking of... let me know when your bike is good to go so we can get out there and test out the new bolt!

Don't be silly...this bonehead it ready to roll now.   

[Steve_in_Florida]

On both of our '92's these have failed.

Jeff,
If Randy can't fix you up, send me a PM. I have a couple of the correct Riv-Nuts left over that FJMonkey (Mark) sent me when I needed a "fix".

You have to drill the hole in the frame for it to fit, but once in place, it works.

Here's my thread about the subject:

http://www.fjowners.com/index.php?topic=7993.0

Let me know if you need a couple.

Steve

[jscgdunn]

Hi Steve,
Thanks for the offer!  I will send you a PM.

Probably obvious, but I take you are installing the riv nut into the outside of the frame by boring out the original hole, correct?

Thanks,

JEff