News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Sprocket hub bearings: Sealed or not sealed..that is my question.

Started by Persistant, June 06, 2013, 11:27:22 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Persistant

June 06, 2013, 11:27:22 PM
As I am coming close to finishing my Suzuki rear wheel mod I am replacing all the bearings and seals with compatible but non Suzuki OEM parts.  The stock bearing on the outer side of the sprocket hub is a non sealed one protected by an outer seal.  My replacments have seals, should I pull the seals on the bearing or leave them?

Cheers,

Andrew

movenon

#1
June 07, 2013, 12:40:32 AM
IMO leave them... At least that's what I did.. They do no harm.
George
Life isn't about having the best, but about making the best of what you have...

1990 FJ 1200

ribbert

#2
June 07, 2013, 03:38:36 AM
Leave them, they're sealed bearings, already packed.
"Tell a wise man something he doesn't know and he'll thank you, tell a fool something he doesn't know and he'll abuse you"

Tiger

#3
June 07, 2013, 04:19:35 AM
 :hi: Just did all my wheel/hub bearings over the winter. I left the seals well alone... :good2:

John.
p s So, now you have it from U S A, Australia & Canada :rofl2: :lol: :rofl:... :biggrin:
Life should not be a journey to the grave with the intention of arriving safely, in an attractive & well preserved body...but rather to slide in sideways, body completely worn out and and with your last dying breath screaming, "HOOOYA LIFE, lets try that again"!!!
Print
Go Up Pages1
User actions