News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

new Member intro

Started by Berge32, April 07, 2013, 02:01:21 AM

Previous topic - Next topic

Berge32

Thanks David,

The overflow hose are attached and in good condition.  When I cleaned the carbs, I used one of the manuals of the files section as a guide and did clean this orfice on each carb. I both soaked the bowls and  carbs and shot them with carb cleaner till everyting was flowing through all the ports.  Hopefully this gets me running easier. 

I haven't looked into the UNI's, what is the benefit to them vs the K&N's?  Will I need to adjust my jets? I already have a jet kit that was installed by the original owner... 
1986 FJ 1200
2005 VTX 1300

SlowOldGuy

The UNIs are foam filter media.  Much better filter than the single sheet of oiled cotton used by K&N.

They also stay installed better. 2 dual pods vs. 4 individual.  You shouldn't have to change any jetting or needle positions.

DavidR.

movenon

Welcome Luke !! You found the right place !!
George
Life isn't about having the best, but about making the best of what you have...

1990 FJ 1200

Tiger

 :hi: Hey Luke, pull up a log and enjoy a beer with a great group of people :drinks:

John.
Life should not be a journey to the grave with the intention of arriving safely, in an attractive & well preserved body...but rather to slide in sideways, body completely worn out and and with your last dying breath screaming, "HOOOYA LIFE, lets try that again"!!!