News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Headlight Aimer.

Started by Jeff0308, March 01, 2013, 03:38:15 AM

Previous topic - Next topic

Jeff0308

I tried the boat website that Pete sent me. I emailed them and they sent me a reply. NO LONGER AVAILABLE. The website obviously hasn't been updated. Never the less it's good to find other places to try. I emailed Randy. Same response. Never thought of trying model shops for bits. Time to think outside the box. I build the odd model R/C planes as well but I've not yet seen any of them but I haven't really looked either. I now have to check if any of the piece is still attached and go from there. Never a dull moment, but then it's a nice for a challenge.

Jeff0308

I managed to get my mobile phone under the fairing and took a photo of whats left of the headlight aimed. The piece on the shaft is still there. Front half gone to god.

fj11.5

then your in luck,  i have just the bit you need, , send me your address ill send it over if you want it
unless you ride bikes, I mean really ride bikes, then you just won't get it

84 Fj1100  effie , with mods
( 88 ) Fj 1200  fairly standard , + blue spots
84 Fj1100 absolutely stock standard, now more stock , fitted with Fj12 twin system , no rusted headers for this felicity jayne

Jeff0308

I sent you a PM with my details. Many thanks. jeff

fj11.5

thanks mate, just replied, website was down for me
unless you ride bikes, I mean really ride bikes, then you just won't get it

84 Fj1100  effie , with mods
( 88 ) Fj 1200  fairly standard , + blue spots
84 Fj1100 absolutely stock standard, now more stock , fitted with Fj12 twin system , no rusted headers for this felicity jayne