News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Fzr genesis front wheel spacer???????

Started by fj1200owl, February 22, 2013, 08:25:52 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

fj1200owl

February 22, 2013, 08:25:52 AM
Just fitted the 1988 fzr genesis front wheel to my 1994 abs. I removed the abs sensor and totally disconnect the abs system  , no probs the question is there is a need for a spacer to be made I looked on the site and can't seem to see if anyone has done this before and the dimensions for the spacer? any advise would be truly appreciated.

:dash2:  :dash2:

FJmonkey

#1
February 22, 2013, 09:21:05 AM
What about measuring what you took out?
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

hein

#2
February 22, 2013, 11:18:07 AM
You need the right side wheel spacer for the non ABS version of the FJ. Part# 90387-15550-00. available at any Yamaha dealer. I got mine from Yamaha sports Plaza for about $7.00.

Hein.
What do you mean, you don't have a lathe?

fj1200owl

#3
February 22, 2013, 11:42:53 AM
It is difficult to get a accurate measure ment as the abs plate is not totally flat. Thanks for the part number I will order one from the dealers tomorrow.

:i_am_so_happy:   

fj johnnie

#4
February 24, 2013, 01:32:52 PM
 Sorry Movenon, my wheel is from a 1988.
Print
Go Up Pages1
User actions